Pro1.pl | See the cheapest prices and offers on !URL

Drymaster Loft replacement filter (old type)

Drymaster Loft replacement filter (old type) Product Part Number DRI-ECO-FILTERKIT

GBP 35.51

1

Genuine Nuaire MRXBOX- Loft Filter (pack of 2 G4) - XBOXLOFTFIL

Genuine Nuaire MRXBOX- Loft Filter (pack of 2 G4) - XBOXLOFTFIL Set of 2 x G4 cleanable filters Nuaire MRXBOX95 -LH1 - LH2 - Loft (Floor mounted unit with pipes out the sides of unit) These filters are designed to last for up to 3 years if regularly cleaned This product may also be called MVHR-LOFT-FILTER KIT Dimensions194mm x 347mm

GBP 134.38

1

Nuaire Drimaster-ECO-NOX Loft Mounted PIV

Nuaire Drimaster-ECO-NOX Loft Mounted PIV Product Part Number Nuaire Drimaster-ECO-NOX-HC (In Home Controls with Carbon Filters) - DRI-ECO-NOX-HC Nuaire Drimaster-ECO-NOX-HEAT (In Home Controls RF enabled WITH HEATER & CARBON FILTERS) - DRI-ECO-NOX-HEAT Description Nuaire Drimaster-ECO-NOX-HC By utilising Nuaire’s market-leading Positive Input Ventilation (PIV) strategy as well as two carbon cartridges inside of each ePM10 filter, the Drimaster ECO NOX eliminates condensation dampness, filters out harmful pathogens and particulate matter, and reduces the NOX levels within the home by up to 80%. Nuaire Drimaster-ECO-NOX-HEAT This model has a 400W heating element fitted on the diffuser. Cost-effective and simple to install ventilation solution that has proven to significantly improve indoor air quality, creating a healthy and comfortable living environment. This integrated heater tempers the airflow should the temperature in the loft space drop below a set point, ensuring ultimate comfort in the home. If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within. This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof.

GBP 763.98

1

Nuaire DRI ECO LC PIV

Nuaire DRI ECO LC (Control on Unit) PIV Product Part Number DRI ECO LC Description Basic model with controls sited on the unit within the loft. The unit is fitted with an internal temperature sensor. This sensor continuously monitors the temperature in the loft, boosting the air volume when the loft temperature is above a set level (heat recovery mode). If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within. The unit comes with a 5 year warranty: 1 year parts and labour, remaining 4 years parts only (UK and Ireland only).

GBP 344.54

1

Nuaire DRI ECO HEAT HC PIV

Nuaire DRI ECO HEAT HC (Heat, diffuser control & Wi-Fi) PIV Product Part Number DRI ECO HEAT HC Description The PIV has a 400W heating element fitted on the diffuser. This integrated heater tempers the airflow should the temperature in the loft space drop below a set point, ensuring ultimate comfort in the home. If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within. This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof. The unit comes with a 7 year warranty: 1 year parts and labour, remaining 6 years parts only (UK and Ireland only).

GBP 569.17

1

Nuaire DRI ECO HEAT HCS PIV

Nuaire DRI ECO HEAT HCS (Heat, diffuser control, no Wi-Fi) PIV Product Part Number DRI ECO HEAT HCS Description Our standard heat model with no control option. This model has a 400W heating element fitted on the diffuser. This integrated heater tempers the airflow should the temperature in the loft space drop below a set point, ensuring ultimate comfort in the home. If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within. This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof. The unit comes with a 7 year warranty: 1 year parts and labour, remaining 6 years parts only (UK and Ireland only).

GBP 545.17

1

Quiet-Vent Linear diffuser

Quiet-Vent Linear diffuser Product Part Number 500mm grille with 3x90mm entry points - MVLD3x90-500mm 1000mm grille with 3x90mm entry points - MVLD3x90-1000mm Description High quality grille with sytlish stainless steel finish. The grille comes with 3 entry points to allow 90mm ducting to be connected inside the loft area.

GBP 194.70

1

Airflow Airflex 75mm x 50 Metre Radial Pipe

Airflow Airflex 75mm x 50 Metre Radial Pipe Product Part Number Airflow 75mm Radial pipe - 9041130 Description Our most popular type of ducting for heat recovery systems Smooth bore with antistatic and antibacterial inner lining Reduces or eliminates noise transfer between rooms (crosstalk) This innovative system uses low resistance ductwork which connect each room to the heat recovery unit via an Air Distribution Box Mix and Match compatibility without any loss of performance with Quiet-Vent round 75mm Radial Ductwork Suitable for installation below loft insulation, timber wall, concrete ceilings, concrete floors, and cavity walls

GBP 178.18

1

Nuaire DRI ECO HC PIV

Nuaire DRI ECO HC (Control on diffuser) PIV Product Part Number DRI ECO HC Description This unit has as an added benefit of all system control sited in the ceiling diffuser. This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof. The unit comes with a 7 year warranty: 1 year parts and labour, remaining 6 years parts only (UK and Ireland only).

GBP 345.70

1

Vent Axia Pozidry Pro

Vent Axia Pozidry Pro Product Part Number Vent Axia Pozidry Pro - 476310 All the Technical Things Selectable air capacities to suit floor areas up to 200m2 IPX2 rated Uses the latest lo-carbon motor technical for low running costs Ultra-low sound level Complete with ceiling diffuser, flexible duct, and worm drive clips Anti-vibration legs offer flexibility when fitting and guarantee silent running Flexible feet allow the unit to be installed across two joists or along a joist offering simple, easy installation Moulded handle makes carrying the unit safe and simple, allows you to change the pitch of the PIV if hanging kit is used Pozidry Pro is unique in offer F7 filters which filter down PM2.5 including diesel particulates Smart Sense technology is easy to set up with smart data logging capabilities all access via the intuitive 3 button menu This unit uses a sensor to monitor the temperature in the loft The Lo-Carbon PoziDry Pro features a specially developed Lo-Carbon DC fan/motor arrangement which runs quietly and delivers incredibly low running costs of less than £3 per year to run, the motor operating temperature is -25/40°c Performance The Lo-Carbon PoziDry pro uses a sensor to monitor the temperature in the loft, automatically adjusting the air volume when necessary. The unit will continuously ventilate silently in the background whilst in ‘Trickle’ mode. Once the unit automatically senses excess heat being lost into the loft the airflow will increase to ‘Normal’ mode to recover heat that would otherwise be lost through the roof. During summer months should the loft exceed 27°C the unit will enter ‘stand-by’ mode in order stop the circulation of warm air allowing for a more comfortable living environment. PoziDry Pro Heater models automatically turn on the 500W heater to boost air temperature by 10°C during colder months. Under assessment with BBA. Controllability The unit can be controlled by Smart Sense™ Technology – Easy set up and smart data logging capabilities all accessed via the intuitive 3 button menu on the unit Speed control selection is easy. Once house size is selected based on number of bedrooms, PoziDry Pro automatically selects the correct Trickle and Normal speeds. Should you need to adjust speed manually this can be done easily. Data Logger allows the unit to record how long it has been running in each of its speeds. It also measures the number of days the product has been switched on to provide precise running information. Smart Sense technology can also record the duration of heater activity and energy used Installation The Lo-Carbon PoziDry Pro is uniquely flexible in its

GBP 342.00

1

Airflow Airflex 51x114mm x 20 Metre Oval Pipe

Airflow Airflex 51x114mm x 20 Metre Oval Pipe Product Part Number Ariflow 51x114mm 20 metre Pipe - 90000255 Description High Quality Radial Oval Ducting 51mm x 114mm x 20meter Smooth bore with antistatic and antibacterial inner lining Reduces or eliminates noise transfer between rooms (crosstalk) Minimum recommended bend radius - Horizontal 160mm - Lateral 315mm This innovative system uses low resistance oval ductwork which connect each room to the heat recovery unit via an Air Distribution Box Mix and Match compatibility without any loss of performance with Airflex Pro and Quiet-Vent round 75mm Radial Ductwork with the use of transition pieces Suitable for installation below loft insulation, timber wall, concrete ceilings, and cavity walls

GBP 231.62

1

Nuaire DRI ECO LINK HC PIV

Nuaire DRI ECO HC (Control on diffuser & Optional Acc) PIV Product Part Number DRI ECO LINK HC Description DRI-ECO-LINK-HC (Hall Control) model is a cost effective solution for social housing providers. Its non -disruptive installation making it ideal for repairs and maintenance schemes. This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof. The unit comes with a 7 year warranty: 1 year parts and labour, remaining 6 years parts only (UK and Ireland only).

GBP 595.91

1

Vent Axia Pozidry Pro with Heater

Vent Axia Pozidry Pro with Heater Product Part Number Vant Axia Pozidry Pro with Heater - 476311 Key Features Temper Heater highly effective at reducing condensation and mould. simple to install and commission Selectable air capacities to suit floor area up to 200m2 Uses latest Lo-Carbon motor technology for low running costs Ultra low sound level Low Running Cost Complete with ceiling diffuser, flexible duct and worm drive clips Standard 5 year guarantee Up to 5 year maintenance free G4 filter Anti-vibration Legs offer flexibility when fitting and guarantee silent running. Flexible Feet – allow the PoziDry Pro™ to be installed across two joists or along joist offering simple easy installation Moulded Handle – Makes carrying PoziDry Pro™ safe and simple. The handle also allows you to change the pitch of the PIV if hanging kit is used Filters- PoziDry Pro™ is unique in offering F7 filters which filter down to PM2.5 which includes harmful diesel particulates Smart Sense™ Technology – Easy set up and smart data logging capabilities all accessed via the intuitive 3 button menu. IPX2 rated and Under assessment with BBA Heater The 500W heater is fully flexible and has the option to be installed at diffuser level to reduce heat loss through the ducting. This means more heat enters the habitable areas of the house. Smart Sense controls allow the Pozidry Pro to be adjusted fully when the heater is activated making it adaptable for all lifestyles. Performance The Lo-Carbon PoziDry pro uses a sensor to monitor the temperature in the loft, automatically adjusting the air volume when necessary. The unit will continuously ventilate silently in the background whilst in ‘Trickle’ mode. Once the unit automatically senses excess heat being lost into the loft the airflow will increase to ‘Normal’ mode to recover heat that would otherwise be lost through the roof. During summer months should the loft exceed 27°C the unit will enter ‘stand-by’ mode in order stop the circulation of warm air allowing for a more comfortable living environment. PoziDry Pro Heater models automatically turn on the 500W heater to boost air temperature by 10°C during colder months. Under assessment with BBA. Filtration Up to 5 year maintenance free G4 filter as standard Standard (PM10 filtration) which filter out many every day pollutants such as pollen & dust. Optional F7

GBP 421.20

1

Metal Male Duct Connector

Metal Male Duct Connector Product Part Number 100mm Male Connector - C100MM 125mm Male Connector - C125MM 150mm Male Connector - C150MM 160mm Male Connector - C160MM 180mm Male Connector - C180MM 200mm Male Connector - C200MM Description Male fitting constructed of high quailty durable galvanised metal. NOTE: Supplied without seals Made in the UK Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of

GBP 2.40

1

Rectangular Self Seal Coupling Duct to Duct

Rectangular Self Seal Coupling Duct to Duct Prouct Part Number 204x60mm Duct to Duct Coupling - VSS204DD 220x90mm Duct to Duct Coupling - VSSC220DD Description 204x60mm Self Seal Conn Duct to Duct - VSSC204DD Used to connect 204x60mm ducting to a 204x60mm ducting Zero air leakage No tape or sealant required Quick and easy to install Duct to fitting also available - VSSC204DF 22X90mm Self Seal Conn Duct to Duct - VSSC220DD Used to connect 220x90mm ducting to a 220x90mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to fitting also available - VSSC220DF Our PVC ducting range is UK manufactured with high quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 9.73

1

Short Round to Rectangular Adaptor Female

110x54mm - Short Round to Rectangular Adaptor Female Product part Number Short Round Female Adaptor - AS110100 Description Adaptor for 100mm round female spigot to 110mm x 54mm rectangular duct pipe Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm Rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 110x54mm rectangular to 100mm

GBP 2.96

1

Verplas 125mm - PVC Self Seal Connector Duct to Fitting

Verplas 125mm - PVC Self Seal Connector Duct to Fitting Product Part Number 125mm - PVC Self Seal Connector duct to fitting - VSSC125PF Description Used to connect 125mm ducting to 125mm fitting Zero air leakage No tape or sealant required Quick and easy to instal Duct to duct also available - VSSC125PP Top Quality UK Manufactured duct to duct connectors Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Sizes Self Seal duct to fitting is available in 125mm if you require larger ductwork we recommend you use Metal Spiral ducting and fittings due to superior strength

GBP 10.13

1

Quiet-Vent Round Metal Ducting

Quiet-Vent Ventilation Round Metal Ducting Product Part Number 100mm Metal Pipework x 1 meter - P100M-1 125mm Metal Pipework x 1 meter - P125M-1 150mm Metal Pipework x 1 meter - P150M-1 180mm Metal Pipework x 1 meter - P180M-1 200mm Metal Pipework x 1 meter - P200M-1 Description Galvanised spiral metal, available in different sizes, and available in 1-meter lengths. Duct length can be joined using Metal Male Duct Connectors. Compatibility Compatible with most other leading manufacturers for galvanised metal ducting. Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping the duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm Rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 100mm x 1 Meter Round Metal Ducting 125mm x 1 Meter Round Metal Ducting 150mm x 1 Meter Round Metal Ducting 180mm x 1 Meter Round Metal Ducting 200mm x 1 Meter Round Metal Ducting

GBP 8.06

1

Metal 90° Bend

Metal 90° Bend Product Part Number 100mm - B90100M 125mm - B90125M 150mm - B90150M 160mm - B90160M 180mm - B90180M 200mm - B90200M Description 90 degree galvanized metal elbow bend which uses 2 male spigots, which will fit inside round pipe or flexible hose. Best used with galvanised steel spiral ducting (round metal ducting - P100M-1). NOTE: Supplied without rubber Seals Our metal ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Galvanised Metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool

GBP 6.82

1

Rectangular Self Seal Coupling Duct to Fitting

Rectangular Self Seal Coupling Duct to Fitting Product Part Number 204x60mm Duct to Fitting Coupling - VSSC204DF 220x90mm Duct to Fitting Coupling - VSSC220DF 204X60 Self Seal Conn Duct to Fitting - VSSC204DF Used to connect 204X60 mm ducting to a 204X60mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to duct fitting also available - VSSC204DD 220X90mm Self Seal Conn Duct to Fitting - VSSC220DF Used to connect 220x90mm ducting to a 220x90mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to duct fitting also available - VSSC220DD Description Our PVC ducting range is UK manufactured with high quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 8.27

1

Quiet-Vent Metal 45o Pressed Bend with seals

Quiet-Vent Metal 45° Bend With Seals Product Part Number 125mm - QV-B45125M 150mm - QV-B45150M 180mm - QV-B45180M Description Quiest-Vent 45° bend metal is constructed of galvanised metal, it uses 2 male spigots which will fit within flexible hose or round pipe. -Can be use with galvanised steel spiral ducting (round metal ducting - P100M-1) Our metal ducting is manufactured in the UK with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Galvanised metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/ (m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 125mm 150mm 180mm

GBP 6.16

1

Rectangular Ducting Elbow Bend(Fixed Spigot)

Rectangular Ducting Elbow Bend (Spigot) Product Part Number 110x54mm Elbow Bend - S110 204x60mm - Fixed Spigot - SP204-125 204x60mm - Fixed Spigot - SP204-150 220x90mm - Fixed Spigot - SP220-125 220x90mm - Fixed Spigot - SP220-150 Description 90 degree elbow bend which converts rectangular PVC ducting to round PVC ducting in order to install a air valve or to convert to round pipe. Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of Plastic Ducting Sealant and Aluminium Duct Sealing Tape Apply Duct sealant to the pipe connections Push together Apply Aluminium Duct Sealing Tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 2.66

1

Quiet-Vent Metal 90o Pressed Bend with seals

Metal 90° Bend With Seals Product Part Number 125mm - QV-B90125M 150mm - QV-B90150M 180mm - QV-B90180M Description 90 degree galvanized metal elbow bend. Uses 2 Male Spigots which will fit round pipe or flexible hose. Reccommended to be used along with galvanised steel spiral ducting(P100M-1) Our metal ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Galvanised Metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 125mm 150mm 180mm

GBP 7.90

1

Vent Axia HR100R/RS

Vent Axia HR100R/RS Product Part Number HR100R - 370377 HR100RS - 435004 Description The HR100R and HR100RS are ideal for single bedrooms/bathroom applications situated in hotel rooms, nursing homes and residential care homes. The HR100R features top access making it ideal for loft installations. The HR100RS features bottom access for installation on the slab above a suspended ceiling. The HR100R/RS is a self-contained heat recovery unit for mounting in lofts and suspended ceilings. The unit is supplied without controls to allow for the unit to be tailored to suit the individual requirements. Compatible with standard 100mm ducting for connection to internal grilles and external cowl. The unit comes fitted with a single 2-speed motor, and provides continuous low volume ventilation with a boost option. A variety of control devices are available for manual or automatic speed control. An integral heat exchanger transfers heat from the outgoing stale air to the fresh air supply, raising the supply air temperature whilst at the same time reducing its relative humidity. Up to 18l/s FID capacity. The unit provides superior control of condensation and odours, ideal for bathrooms or small internal rooms.

GBP 382.08

1

Vent Axia Lo-Carbon Multivent MVDC-MS unit

Vent Axia Lo-Carbon Multivent MVDC-MS Unit Product Part Number Vent Axia MVDC-MS - 437634 Key Features Variable speed settings Ultra-quiet - acoustically lined for low noise levels Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (H x W x D) 310mm x 360mm x 249mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Recognised in SAP Appendix Q Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. Isolator relay controller, Vent-Axia part number 442030

GBP 279.00

1

Brand

Merchant

Price (EUR)