51 results (0,14727 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Mountz EZ-12T/2000 Telescoping Arm (Max. Reach 78") (- 12 N.m)

Mountz EZ-12T/2000 Telescoping Arm (Max. Reach 78") (- 12 N.m)

Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arm is ideal for assembly lines like automotive, aerospace, appliance & electronics where space is a premium and operator safety is mandatory. Note: It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-30T Range: - 30 N.m, - 22.1 lbf.ft, - 3.1 kgf.m. Tool Weight:1.5 lbs. Clamp Color:1 - 2" Minimum Arm Reach:18.7" Maximum Arm Reach:37.5" Tool Position Option: P1

GBP 1739.99
1

Mountz EZ-30T/2500 Telescoping Arm (Max. Reach 98") (- 30 N.m)

Mountz EZ-30T/2500 Telescoping Arm (Max. Reach 98") (- 30 N.m)

Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arm is ideal for assembly lines like automotive, aerospace, appliance & electronics where space is a premium and operator safety is mandatory. Note: It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-30T Range: - 30 N.m, - 22.1 lbf.ft, - 3.1 kgf.m. Tool Weight:1.5 lbs. Clamp Color:1 - 2" Minimum Arm Reach:18.7" Maximum Arm Reach:37.5" Tool Position Option: P1

GBP 2299.99
1

Mountz EZ-12T Telescoping Torque Arm (- 12 N.m)

Mountz EZ-12T Telescoping Torque Arm (- 12 N.m)

Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arm is ideal for assembly lines like automotive, aerospace, appliance & electronics where space is a premium and operator safety is mandatory. Note: It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-30T Range: - 30 N.m, - 22.1 lbf.ft, - 3.1 kgf.m. Tool Weight:1.5 lbs. Clamp Color:1 - 2" Minimum Arm Reach:18.7" Maximum Arm Reach:37.5" Tool Position Option: P1

GBP 929.99
1

Mountz EZ-12T/1500 Telescoping Arm (Max. Reach 59") (- 12 N.m)

Mountz EZ-12T/1500 Telescoping Arm (Max. Reach 59") (- 12 N.m)

Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arm is ideal for assembly lines like automotive, aerospace, appliance & electronics where space is a premium and operator safety is mandatory. Note: It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-30T Range: - 30 N.m, - 22.1 lbf.ft, - 3.1 kgf.m. Tool Weight:1.5 lbs. Clamp Color:1 - 2" Minimum Arm Reach:18.7" Maximum Arm Reach:37.5" Tool Position Option: P1

GBP 1499.99
1

Mountz EZ-30T Telescoping Torque Arm (- 30 N.m)

Mountz EZ-30T Telescoping Torque Arm (- 30 N.m)

Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arm is ideal for assembly lines like automotive, aerospace, appliance & electronics where space is a premium and operator safety is mandatory. Note: It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-30T Range: - 30 N.m, - 22.1 lbf.ft, - 3.1 kgf.m. Tool Weight:1.5 lbs. Clamp Color:1 - 2" Minimum Arm Reach:18.7" Maximum Arm Reach:37.5" Tool Position Option: P1

GBP 1199.99
1

Mountz EZ-25R Articulated Torque Arm (- 25 N.m)

Mountz EZ-25R Articulated Torque Arm (- 25 N.m)

The EZ-Glider torque arms are designed to improve production and quality control during the assembly process. With the ability to bend like an elbow, the torque arm provides agility to position the tool in a variety of positions for different applications. Arm can be set at an inclination of 0, 22.5 & 45. The effortless handling of the torque arm provides comfortable tool operation and increased production. Includes an in-line driver clamp. Note: An additional balancer can be added to the EZ-40R & EZ-100R model to increase balancer capacity. The additional balancer increases the dual balancer capacity to 5.3 - 8.8 for the EZ-40R, and 6.6 - 13.2 for the EZ-100R. Model:EZ-100R Range: - 100 N.m, - 73.7 lbf.ft, - 10.2 kgf.m. Tool Height:40.5 Clamp Color:1 - 2" Balancer Weight Capacity:4.4 - 7.7 lbs Arm Reach At Inclination 0:26 1/3" - 34" Arm Reach At Inclination 22.5:25 1/8" - 33" Arm Reach At Inclination 45:22" - 29 1/2"

GBP 1999.99
1

Mountz EZ-40R Articulated Torque Arm (- 40 N.m)

Mountz EZ-40R Articulated Torque Arm (- 40 N.m)

The EZ-Glider torque arms are designed to improve production and quality control during the assembly process. With the ability to bend like an elbow, the torque arm provides agility to position the tool in a variety of positions for different applications. Arm can be set at an inclination of 0, 22.5 & 45. The effortless handling of the torque arm provides comfortable tool operation and increased production. Includes an in-line driver clamp. Note: An additional balancer can be added to the EZ-40R & EZ-100R model to increase balancer capacity. The additional balancer increases the dual balancer capacity to 5.3 - 8.8 for the EZ-40R, and 6.6 - 13.2 for the EZ-100R. Model:EZ-100R Range: - 100 N.m, - 73.7 lbf.ft, - 10.2 kgf.m. Tool Height:40.5 Clamp Color:1 - 2" Balancer Weight Capacity:4.4 - 7.7 lbs Arm Reach At Inclination 0:26 1/3" - 34" Arm Reach At Inclination 22.5:25 1/8" - 33" Arm Reach At Inclination 45:22" - 29 1/2"

GBP 2299.99
1

Mountz EZ-12R Articulated Torque Arm (- 12 N.m)

Mountz EZ-12R Articulated Torque Arm (- 12 N.m)

The EZ-Glider torque arms are designed to improve production and quality control during the assembly process. With the ability to bend like an elbow, the torque arm provides agility to position the tool in a variety of positions for different applications. Arm can be set at an inclination of 0, 22.5 & 45. The effortless handling of the torque arm provides comfortable tool operation and increased production. Includes an in-line driver clamp. Note: An additional balancer can be added to the EZ-40R & EZ-100R model to increase balancer capacity. The additional balancer increases the dual balancer capacity to 5.3 - 8.8 for the EZ-40R, and 6.6 - 13.2 for the EZ-100R. Model:EZ-100R Range: - 100 N.m, - 73.7 lbf.ft, - 10.2 kgf.m. Tool Height:40.5 Clamp Color:1 - 2" Balancer Weight Capacity:4.4 - 7.7 lbs Arm Reach At Inclination 0:26 1/3" - 34" Arm Reach At Inclination 22.5:25 1/8" - 33" Arm Reach At Inclination 45:22" - 29 1/2"

GBP 1439.99
1

Mountz EZ-100R Articulated Torque Arm (- 100 N.m)

Mountz EZ-100R Articulated Torque Arm (- 100 N.m)

The EZ-Glider torque arms are designed to improve production and quality control during the assembly process. With the ability to bend like an elbow, the torque arm provides agility to position the tool in a variety of positions for different applications. Arm can be set at an inclination of 0, 22.5 & 45. The effortless handling of the torque arm provides comfortable tool operation and increased production. Includes an in-line driver clamp. Note: An additional balancer can be added to the EZ-40R & EZ-100R model to increase balancer capacity. The additional balancer increases the dual balancer capacity to 5.3 - 8.8 for the EZ-40R, and 6.6 - 13.2 for the EZ-100R. Model:EZ-100R Range: - 100 N.m, - 73.7 lbf.ft, - 10.2 kgf.m. Tool Height:40.5 Clamp Color:1 - 2" Balancer Weight Capacity:4.4 - 7.7 lbs Arm Reach At Inclination 0:26 1/3" - 34" Arm Reach At Inclination 22.5:25 1/8" - 33" Arm Reach At Inclination 45:22" - 29 1/2"

GBP 3999.99
1

Mountz EZ-TorQ III 50I (56.5 - 565 cN.m

Mountz EZ-TorQ III 50I (56.5 - 565 cN.m

The EZ-TorQ III 10i torque tester makes torque control easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy. EZ-TorQ digital torque tester features a built-in transducer. The easy-to-use torque analyser is ideal for all small hand tools & non-impacting power tools. Accuracy 0.5% of reading from 20% to 100% of full scale. Accuracy 1% of reading from 10% to 20% of full scale. Portable & rechargeable. Vivid full color, smartphone-like touchscreen interface. Virtually unlimited data point storage with swappable SD card memory. Sophisticated on board software with SPC analysis.Ability to analyze and create statistical data. Note: Each model includes a case, universal charger, 1/4 female/hex square drive adapter and two screw run down adapters. Model:EZ-TorQ III 300i Drive Size:17mm F/Hex Range: 339 - 3390 cN.m ,30 - 300 lbf.in, 34.5 - 345 kgf.cm. Tool Weight:3.3 lbs. Tool Length:8 Tool Width:4.25 Tool Height:2.125

GBP 2999.99
1

Mountz EZ-TorQ III 10I (11.3 - 113 cN.m

Mountz EZ-TorQ III 10I (11.3 - 113 cN.m

The EZ-TorQ III 10i torque tester makes torque control easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy. EZ-TorQ digital torque tester features a built-in transducer. The easy-to-use torque analyser is ideal for all small hand tools & non-impacting power tools. Accuracy 0.5% of reading from 20% to 100% of full scale. Accuracy 1% of reading from 10% to 20% of full scale. Portable & rechargeable. Vivid full color, smartphone-like touchscreen interface. Virtually unlimited data point storage with swappable SD card memory. Sophisticated on board software with SPC analysis.Ability to analyze and create statistical data. Note: Each model includes a case, universal charger, 1/4 female/hex square drive adapter and two screw run down adapters. Model:EZ-TorQ III 300i Drive Size:17mm F/Hex Range: 339 - 3390 cN.m ,30 - 300 lbf.in, 34.5 - 345 kgf.cm. Tool Weight:3.3 lbs. Tool Length:8 Tool Width:4.25 Tool Height:2.125

GBP 2999.99
1

Mountz EZ-TorQ III 100I (113 - 1130 cN.m

Mountz EZ-TorQ III 100I (113 - 1130 cN.m

The EZ-TorQ III 10i torque tester makes torque control easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy. EZ-TorQ digital torque tester features a built-in transducer. The easy-to-use torque analyser is ideal for all small hand tools & non-impacting power tools. Accuracy 0.5% of reading from 20% to 100% of full scale. Accuracy 1% of reading from 10% to 20% of full scale. Portable & rechargeable. Vivid full color, smartphone-like touchscreen interface. Virtually unlimited data point storage with swappable SD card memory. Sophisticated on board software with SPC analysis.Ability to analyze and create statistical data. Note: Each model includes a case, universal charger, 1/4 female/hex square drive adapter and two screw run down adapters. Model:EZ-TorQ III 300i Drive Size:17mm F/Hex Range: 339 - 3390 cN.m ,30 - 300 lbf.in, 34.5 - 345 kgf.cm. Tool Weight:3.3 lbs. Tool Length:8 Tool Width:4.25 Tool Height:2.125

GBP 2999.99
1

Mountz EZ-TorQ III 300I (339 - 3390 cN.m

Mountz EZ-TorQ III 300I (339 - 3390 cN.m

The EZ-TorQ III 10i torque tester makes torque control easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy. EZ-TorQ digital torque tester features a built-in transducer. The easy-to-use torque analyser is ideal for all small hand tools & non-impacting power tools. Accuracy 0.5% of reading from 20% to 100% of full scale. Accuracy 1% of reading from 10% to 20% of full scale. Portable & rechargeable. Vivid full color, smartphone-like touchscreen interface. Virtually unlimited data point storage with swappable SD card memory. Sophisticated on board software with SPC analysis.Ability to analyze and create statistical data. Note: Each model includes a case, universal charger, 1/4 female/hex square drive adapter and two screw run down adapters. Model:EZ-TorQ III 300i Drive Size:17mm F/Hex Range: 339 - 3390 cN.m ,30 - 300 lbf.in, 34.5 - 345 kgf.cm. Tool Weight:3.3 lbs. Tool Length:8 Tool Width:4.25 Tool Height:2.125

GBP 3399.99
1

Mountz EZ-TorQ III 150I (169.5 - 1695 cN.m

Mountz EZ-TorQ III 150I (169.5 - 1695 cN.m

The EZ-TorQ III 10i torque tester makes torque control easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy. EZ-TorQ digital torque tester features a built-in transducer. The easy-to-use torque analyser is ideal for all small hand tools & non-impacting power tools. Accuracy 0.5% of reading from 20% to 100% of full scale. Accuracy 1% of reading from 10% to 20% of full scale. Portable & rechargeable. Vivid full color, smartphone-like touchscreen interface. Virtually unlimited data point storage with swappable SD card memory. Sophisticated on board software with SPC analysis.Ability to analyze and create statistical data. Note: Each model includes a case, universal charger, 1/4 female/hex square drive adapter and two screw run down adapters. Model:EZ-TorQ III 300i Drive Size:17mm F/Hex Range: 339 - 3390 cN.m ,30 - 300 lbf.in, 34.5 - 345 kgf.cm. Tool Weight:3.3 lbs. Tool Length:8 Tool Width:4.25 Tool Height:2.125

GBP 2999.99
1

Mountz EZ-200IT/1500 Inverted Telescoping Arm (Max. Reach 59")

Mountz EZ-200IT/1500 Inverted Telescoping Arm (Max. Reach 59")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 6599.99
1

Mountz EZ-70IT/2500 Inverted Telescoping Arm (Max. Reach 98")

Mountz EZ-70IT/2500 Inverted Telescoping Arm (Max. Reach 98")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 3999.99
1

Mountz EZ-70IT/2000 Inverted Telescoping Arm (Max. Reach 78")

Mountz EZ-70IT/2000 Inverted Telescoping Arm (Max. Reach 78")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 3699.99
1

Mountz EZ-120IT/2000 Inverted Telescoping Arm (Max. Reach 78")

Mountz EZ-120IT/2000 Inverted Telescoping Arm (Max. Reach 78")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 4599.99
1

Mountz EZ-200IT/2500 Inverted Telescoping Arm (Max. Reach 98")

Mountz EZ-200IT/2500 Inverted Telescoping Arm (Max. Reach 98")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 7399.99
1

Mountz EZ-120IT/2500 Inverted Telescoping Arm (Max. Reach 98")

Mountz EZ-120IT/2500 Inverted Telescoping Arm (Max. Reach 98")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 4999.99
1

Mountz EZ-200IT/2000 Inverted Telescoping Arm (Max. Reach 78")

Mountz EZ-200IT/2000 Inverted Telescoping Arm (Max. Reach 78")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 7399.99
1

Mountz EZ-300T/2500 Telescoping Arm (Max. Reach 98")

Mountz EZ-300T/2500 Telescoping Arm (Max. Reach 98")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 13999.99
1

Mountz EZ-120IT/1500 Inverted Telescoping Arm (Max. Reach 59")

Mountz EZ-120IT/1500 Inverted Telescoping Arm (Max. Reach 59")

The EZ-Glider inverted telescoping torque arms securely keep electric or pneumatic torque tools in perpendicular or a level alignment to help prevent side loading or cross threading occurring during the assembly process. Crafted with lightweight durable carbon fiber the torque arm collapses like a telescope. The torque arms are ideal for assembly lines like automotive, aerospace and appliance where space is a premium and operator safety is mandatory. The ergonomic design of the EZ-Glider torque arms reduces RMI (repetitive motion injury) and CTS (carpal tunnel syndrome). The effortless handling of the torque arm provides comfortable tool operation and increased production. The flexible telescoping arms provide manufacturers the ability to mount the arms to a wall, workbench, a standard rail system, aluminium extrusion or existing overhead system. The torque arms are maintenance free. Note:It is recommended to use a tool balancer with the telescoping torque arms. The telescoping arms should not be used at maximum arm reach on a permanent basis. Tool Positioning Options Besides the standard in-line tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, a different tool clamp needs to be order separately. Model:EZ-120IT/1500 Range:- - 120 N.m , -88.5 lbf.ft, - 12.2 kgf.m. Tool Weight:5.3 lbs. Clamp Color:1 3/8 - 2" Minimum Arm Reach:27.2" Maximum Arm Reach:59" Tool Position Option:P2

GBP 3999.99
1