292 results (0,14156 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Hochiki Marine Multi-Sensor Photoelectric and Heat ACC-ENM

Hochiki Marine Multi-Sensor Photoelectric and Heat ACC-ENM

Hochiki ACC-ENM Marine Multi-Sensor Photoelectric and HeatModel ACC-ENM is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High Performance photoelectric smoke chamber.The ACC-ENM has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENM smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing green when polling turning red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB EN54 Part 7 LR GLSIL Level 2 approved variants available

GBP 48.37
1

Hochiki Multi Sensor Detector Heat and Smoke Ivory ACC-EN

Hochiki Multi Sensor Detector Heat and Smoke Ivory ACC-EN

Hochiki ACC-EN Multi Sensor Detector Heat and Smoke IvoryThe ACC-EN is a direct replacement of the ACA-E and will share the same bases. Model ACC-EN is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High Performance photoelectric smoke chamber.The ACC-EN has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-EN smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 viewing green when polling turn red in fire Pulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB VdS approved to classes A1 CSIL Level 2 approved variants availableAvailable in whiteImprovementsEnhanced Performance ChamberNew Outer Cover Design featuring indicative sensor type markingsSoftware AdvancedIncrease Noise ImmunityFully backwards compatible

GBP 38.04
1

Hochiki Marine Multi-Sensor Photoelectric and Heat White ACC-ENMWHT

Hochiki Marine Multi-Sensor Photoelectric and Heat White ACC-ENMWHT

Hochiki ACC-ENMWHT Marine Multi-Sensor Photoelectric and Heat WhiteModel ACC-ENMWHT is a Multi-Sensor which is fully compatible with Hochikis ESP Analogue Addressable Protocol and incorporates a thermal element and High-Performance photoelectric smoke chamber.The ACC-ENMWHT has three modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-ENMWHT smoke chamber can easily be removed or replaced for easy maintenance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing green when polling turn red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB EN54 Part 7 LR GLAvailable in ivory

GBP 48.37
1

Hochiki Conventional Call Point with LED and red back box CCP-ELED

Hochiki Conventional Call Point with LED and red back box CCP-ELED

Hochiki Conventional Call Point with LED and red back box CCP-ELEDThe CCP-E is a Conventional call-point based upon the industry standard KAC world series housing and features easy to install push-fit wiring terminals.The unit can support either a Frangible Glass element or a Non Frangible Plastic element.Key FeaturesApproved to EN54-112001Terminals can accommodate up to a 2.5 mm solid conductorOther colours available on requestApproved by LPCB

GBP 12.35
1

Hochiki ESPFIREBEAMXTRA espFIREbeam Xtra Beam Smoke Sensor - Includes Controller and Reflector

Hochiki ESPFIREBEAMXTRA espFIREbeam Xtra Beam Smoke Sensor - Includes Controller and Reflector

Hochiki ESPFIREBEAMXTRA espFIREbeam Xtra Beam Smoke Sensor - Includes Controller and ReflectorThe esp FIREBEAM xtra is a Reflective Beam Smoke Detector fully approved to EN 54-122015 which can offer a maximum detection range of 160 m.The units newly designed optics increase sensitivity whilst the enhanced internal software reduces false alarms.The detector comes with a separate controller unit which allows engineers to commission monitor and maintain from ground level. Detection range is 70 m for the standard unit increasing to 140 m or 160 m with the addition of the medium or long-range reflector kits.The detector also features advanced motorised technology allowing it to self-align to the centre of the reflector during commissioning.Once commissioned the detector continually monitors alignment and will automatically realign itself back to the centre of the reflector if any building movement occurs.The FIREBEAM xtra features an integral loop module allowing full connectivity to the Hochiki ESP analogue addressable loop.Key Features7 70 m standard detection rangeExtensions kits available to enhance detection range up to 160 mApproved by VdS to EN 54-122015Continually corrects itself against building movementBrand new optics design reduces false alarmsFully compatible with the Hochiki ESP analogue addressable protocol

GBP 539.75
1

Hochiki Multi Sensor Detector Heat and Smoke White ACC-ENWHT

Hochiki Multi Sensor Detector Heat and Smoke White ACC-ENWHT

Hochiki ACC-ENWHT Multi Sensor Detector Heat and Smoke WhiteThe ACC-ENWHT has 3 modes which are controlled from the Control Panel allowing either the optical element or thermal element or both elements to be active in making the fire decision. The sensor polling LEDs can be controlled via the Control Panel pulsingnon-pulsing. The ACC-E smoke chamber can esily be removed or replaced for easy maintentance.Key FeaturesUser selectable modesIncorporates Optical Heat elementsRemovable High Performance ChamberTwin LEDs allow 360 degree viewing - green when polling turn red in firePulsingnon-pulsing controlled from panelVariable sensitivityElectronically AddressedLPCB VdS approved to Classes A1 CSIL Level 2 approved variants available

GBP 38.04
1

Hochiki Ekho EK-WL8-OV Hybrid Wireless Optical Smoke Sensor with Built in Voice Alarm and VAD

Hochiki Ekho EK-WL8-OV Hybrid Wireless Optical Smoke Sensor with Built in Voice Alarm and VAD

Hochiki Ekho EK-WL8-OV Hybrid Wireless Optical Smoke Sensor with Built in Voice Alarm and VADThe EK-WL8-OV is a wireless optical smoke sensor that incorporates a voice sounder and visual alarm device VAD with white LEDs and 0.5 Hz flash rate.The sensor utilises optical smoke detection technologies and algorithms for improved performance which can contribute to reducing unwanted alarms.Utilising well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.Key FeaturesApproved to EN54-3 7 23 25RED compliantVoice Sounder and VAD IncorporatedInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho TranslatorExpander modules

GBP 297.24
1

Hochiki Ekho EK-WL8-SK Hybrid Wireless Survey Kit

Hochiki Ekho EK-WL8-SK Hybrid Wireless Survey Kit

Hochiki EkhoEK-WL8-SK Hybrid Wireless Survey KitThe EK-WL8-SK Ekho Test Kit consists of a portable wireless translator a wireless smoke sensor and a keypad.The keypad displays the wireless communication signals between the sensor and the translator module enabling you to design a wireless system successfully.Key FeaturesRobust carry caseEasy to use training is required before purchaseAllows for surveying potential hybrid wireless installationsPlease note Power supply not included.

GBP 880.45
1

Hochiki Conventional Wall Sounder Beacon Back Box - Red case CWSB-E BACKBOX

Hochiki Conventional Wall Sounder Beacon Back Box - Red case CWSB-E BACKBOX

Hochiki Conventional Wall Sounder Beacon Back Box - Red case CWSB-E BACKBOXThe CWSB-EBACKBOX is a conventional wall sounder beacon back box which works with the CWSB-E which has improved electronic design which enables very low current consumption whilst providing a range of tones and volumes selectable from the DIL switches on each unit. The unit is supplied with its own base a shallow base IP43 or a deep base IP65. Other lens colours are available upon request.If you require more information about the back box please Contact Us and a member of the team will be happy to assist.

GBP 8.22
1

Hochiki Ekho EK-WL8-IN Hybrid Wireless Single Input Module

Hochiki Ekho EK-WL8-IN Hybrid Wireless Single Input Module

Hochiki Ekho EK-WL8-IN Hybrid Wireless Single Input ModuleThe EK-WL8-IN is a Single Channel Input Module providing a convenient and cost effective solution for monitoring third party equipment.The module is also controllable from the Fire Control Panel via the cause and effect programming and offers the same level of flexibility as a standard addressable module. An optional back box is available and can be bought separately.Key FeaturesApproved to EN54-18 and 25RED compliantMonitored InputBi-directional wireless communicationSelf-optimising wireless amplitude and frequencyTamper SwitchUp to 10 years battery life

GBP 131.70
1

Hochiki MBB-2 Ivory Marine Mounting Back Box with Glands

Hochiki MBB-2 Ivory Marine Mounting Back Box with Glands

Hochiki MBB-2 Ivory Marine Mounting Back Box with GlandsThe approved design of the MBB-2 provides a splash-proof secure fixing for the Hochiki CDX and ESP Marine Approved Range of Detectors and their associated Bases. It can be installed on a variety of different fixing surfaces and because it has been manufactured to match the colour of Hochikis range of products it provides an aesthetically pleasing solution where surface fixed devices are required.The housing supports four 20 mm glanded entries for zone or loop cabling access. It is also supplied with base fixing screws and two cable glands specifically designed to provide protection against water ingress. The detector base fits directly onto the MBB-2 and sits within a slight recess. This provides the accurate fit and the protection against dust and water ingress. The MBB-1 is also the recommended choice of back box for Hochikis Waterproof Heat Detectors the DFG-60E and the ACB-EW.Key Features4 cable entry holes suitable for cable glands 2 glands suppliedColour matched to both ivory and white detector rangesApproved Sensor and Base rangeProvides moisture and dust resistant fixingIdeal for bulk-head fixingApproved by LR and GLNon-marine use version available SBB-2

GBP 5.54
1

Hochiki MBB-2WHT White Marine Mounting Back Box with Glands

Hochiki MBB-2WHT White Marine Mounting Back Box with Glands

Hochiki MBB-2WHT White Marine Mounting Back Box with GlandsThe approved design of the MBB-2 provides a splash-proof secure fixing for the Hochiki CDX and ESP Marine Approved Range of Detectors and their associated Bases. It can be installed on a variety of different fixing surfaces and because it has been manufactured to match the colour of Hochikis range of products it provides an aesthetically pleasing solution where surface fixed devices are required.The housing supports four 20 mm glanded entries for zone or loop cabling access. It is also supplied with base fixing screws and two cable glands specifically designed to provide protection against water ingress.The detector base fits directly onto the MBB-2 and sits within a slight recess. This provides the accurate fit and the protection against dust and water ingress. The MBB-1 is also the recommended choice of back box for Hochikis Waterproof Heat Detectors the DFG-60E and the ACB-EW.Key Features4 cable entry holes suitable for cable glands 2 glands suppliedColour matched to both ivory and white detector rangesApproved Sensor and Base rangeProvides moisture and dust resistant fixingIdeal for bulk-head fixingApproved by LR and GLNon-marine use version available SBB-2

GBP 5.54
1

Hochiki Ekho EK-WL8-H Hybrid Wireless Heat Sensor

Hochiki Ekho EK-WL8-H Hybrid Wireless Heat Sensor

Hochiki Ekho EK-WL8-H Hybrid Wireless Heat SensorThe EK-WL8-H is a wireless A1R heat sensor. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor is designed for installations where smoke detection technology is not suitable. The well- proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.The in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-5 and 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modules

GBP 117.59
1

Hochiki LAW-10 LEAKalarm Water Detection Cable 10 m

Hochiki LAW-10 LEAKalarm Water Detection Cable 10 m

Hochiki LAW-10 LEAKalarm Water Detection Cable 10 mLEAKalarm offers both linear and point water leak detection solutions.Linear leak detection is achieved through the installation of this very responsive sensing cable designed to be fixed under false floors in ceiling voids and other enclosed spaces.Available in lengths of 5m and 10m the cables can be connected by the locking plug and socket system to cover large areas.An EOL device is added to the end of each cable run and cables are connected to LEAKalarm modules that are in turn connected to the LEAKalarm panel loops.Key FeaturesSimple connection and terminationConsistent sensitivityAesthetically attractive

GBP 109.49
1

Hochiki LAW-05 LEAKalarm Water Detection Cable - 5m

Hochiki LAW-05 LEAKalarm Water Detection Cable - 5m

Hochiki LAW-05 LEAKalarm Water Detection Cable - 5mLEAKalarm offers both linear and point water leak detection solutions.Linear leak detection is achieved through the installation of this very responsive sensing cable designed to be fixed under false floors in ceiling voids and other enclosed spaces.Available in lengths of 5m and 10m the cables can be connected by the locking plug and socket system to cover large areas.An EOL device is added to the end of each cable run and cables are connected to LEAKalarm modules that are in turn connected to the LEAKalarm panel loops.Key FeaturesSimple connection and terminationConsistent sensitivityAesthetically attractive

GBP 85.56
1

Hochiki EK-WL8-HS Ekho Heat Sensor cw Sounder

Hochiki EK-WL8-HS Ekho Heat Sensor cw Sounder

Hochiki EK-WL8-HS Ekho Heat Sensor cw SounderThe EK-WL8-HS is a wireless A1R heat sensor which comes with a sounder. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor is designed for installations where smoke detection technology is not suitable. The well- proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.The in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-5 and 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modulesComes with sounder

GBP 200.35
1

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke Detector

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke Detector

Hochiki SOC-E3N Conventional Ivory Photoelectric Smoke DetectorThe SOC-E3N is an optical smoke detector which is fully compatible with the majority of existing Conventional systems.The SOC-E3N incorporates Hochikis unique High Performance optical smoke chamber removing the need to use ionisation detectors in the majority of applications.ASWV Drift Compensation technology is incorporated to ensure the detector is operating at its optimum sensitivity and therefore reducing potential false alarms. If the contamination limit is exceeded then the integral red LED will flash once every three seconds to give a visual warning.The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance chamber Automatic Sensitivity Window Verification ASWV Drift Compensation Technology Remote Indicator outputWide voltage range 9.5 30 V dcLow profile design with one-piece outer coverSingle fire LED - 360 viewingRange of mounting basesApproved by LPCBCDX Range BenefitsQuality High quality products ensures long term reliabilityFlase Alarm Reduction Hoghikis conventional range uses advanced verificaition techniques to reduce the potential for false or unwanted alarms. In addition the Photoelectric Smoke Detectors operate on very low sensitivty yet exceed the requirements of the EN54 standard to minimise false alarms.Approvals Hochikis conventional products are tested and approved to the latest standards and regulations by the major European third party test bodies including LPCB and VdS.Simple Installation Simple installation integration and therefore cost minimisation is achieved through special bases integrated on the same set of cables.Integration and Cost Minimisation Using a number of special bases and through integration detection and evacuation devices on the same set of cables the lowest cost of installation and ownership are achieved. Low current consumption and the capability of integration into security systems further reduce ownership costs.Compatibility Development in alliance with independent panel manufactures ensures that functions and benefits of the Hochiki Conventional Detection range are incorporated and rigorous testing confirms compatibility and compliance.Locking Mechanism The Hochiki Conventional range has been designed for ease of installation with a wide range of bases and adapters and a locking mechanism on all detectors for on-site activation.Simple and Robust Simple and robust connections provide sufficient space for all modern fire alarm cables.

GBP 18.58
1

Hochiki SOC-E3NWHT Conventional White Photoelectric Smoke Detector

Hochiki SOC-E3NWHT Conventional White Photoelectric Smoke Detector

Hochiki SOC-E3NWHT Conventional White Photoelectric Smoke DetectorThe SOC-E3NWHT is a Photoelectric Smoke Detector which is fully compatible with the majority of existing Conventional systems. The SOC-E3NWHT incorporates Hochikis unique High Performance photoelectric smoke chamber removing the need to use Ionisation Detectors in the majority of applications.AFVW Drift Compensation technology is incorporated to ensure the Detector is operating at its optimum sensitivity and therefore reducing potential false alarms. If the contamination limit is exceeded then the integral red will flash once every three seconds to give a visual warning. The smoke chamber is easily removed or replaced for cleaning and utilises a unique baffle design which allows smoke to enter the chamber whilst keeping out ambient light.Key FeaturesRemovable High Performance Chamber Automatic Sensitivity Window Verification ASWV Drift Compensation Technology Remote Indicator outputWide voltage range 9.5 30 V dcLow profile design with one-piece outer coverSingle fire LED - 360 viewingRange of mounting basesApproved by LPCBCDX Range BenefitsQuality High quality products ensures long term reliabilityFlase Alarm Reduction Hoghikis conventional range uses advanced verificaition techniques to reduce the potential for false or unwanted alarms. In addition the Photoelectric Smoke Detectors operate on very low sensitivty yet exceed the requirements of the EN54 standard to minimise false alarms.Approvals Hochikis conventional products are tested and approved to the latest standards and regulations by the major European third party test bodies including LPCB and VdS.Simple Installation Simple installation integration and therefore cost minimisation is achieved through special bases integrated on the same set of cables.Integration and Cost Minimisation Using a number of special bases and through integration detection and evacuation devices on the same set of cables the lowest cost of installation and ownership are achieved. Low current consumption and the capability of integration into security systems further reduce ownership costs.Compatibility Development in alliance with independent panel manufactures ensures that functions and benefits of the Hochiki Conventional Detection range are incorporated and rigorous testing confirms compatibility and compliance.Locking Mechanism The Hochiki Conventional range has been designed for ease of installation with a wide range of bases and adapters and a locking mechanism on all detectors for on-site activation.Simple and Robust Simple and robust connections provide sufficient space for all modern fire alarm cables.

GBP 18.58
1

Hochiki N89R-O-3 Recess High Power Open Area Emergency Light

Hochiki N89R-O-3 Recess High Power Open Area Emergency Light

Hochiki N89R-O-3 Recess High Power Open Area Emergency LightFIREscape Nepto is the latest generation of intelligent self-testing and self- monitoring emergency lighting system from Japanese life safety manufacturer Hochiki.This unique cost effective and fully compliant emergency lighting system is based around an addressable emergency lighting control panel and features addressable self-contained LED luminaires and exit signs.Key FeaturesRecess High Power Open Area Emergency Light

GBP 115.01
1

Hochiki N89R-C-3 Recess High Power Corridor Emergency Light

Hochiki N89R-C-3 Recess High Power Corridor Emergency Light

Hochiki N89R-C-3 Recess High Power Corridor Emergency LightFIREscape Nepto is the latest generation of intelligent self-testing and self- monitoring emergency lighting system from Japanese life safety manufacturer Hochiki.This unique cost effective and fully compliant emergency lighting system is based around an addressable emergency lighting control panel and features addressable self-contained LED luminaires and exit signs.Key FeaturesRecess High Power Corridor Emergency Light

GBP 115.01
1

Hochiki EK-WL8-OS Ekho Smoke Sensor cw Sounder

Hochiki EK-WL8-OS Ekho Smoke Sensor cw Sounder

Hochiki EK-WL8-OS Ekho Smoke Sensor cw SounderThe EK-WL8-OS wireless optical smoke sensor with sounder is the latest in wireless smoke sensor technology. It is a fully intelligent device and compatible with the Ekho wireless Translator and Expander modules.The sensor utilises optical smoke detection technologies and algorithms for improved performance which can contribute to reducing unwanted alarms. Utilising well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.The in-built magnet test allows easy activation to verify correct functionality and response.Key FeaturesApproved to EN54-7 25RED compliantInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho Translator and Expander modules

GBP 203.18
1