49 results (0,15337 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Fireclass 508.032.730FC Fireclass Essential 2 Zone Panel

Fireclass 508.032.730FC Fireclass Essential 2 Zone Panel

Fireclass 508.032.730FC Fireclass Essential 2 Zone PanelThe Fireclass Essential Panel range is an EN-approved low cost conventional panels that are available in both 2 Zone and 4 Zone variants. The panels can support up to 128 devices with a maximum of 32 devices on each zone. The panels are approved to EN 54-2 EN 54-4 and listed as part of the EN 54-13 system certificate.The panel UI has the following features18 LEDs on the 2 Zone Panel and 22 LEDs on the 4 Zone PanelOne piezo buzzer for audible indicationEight push buttons for user inputsKey FeaturesModern and aesthetic designSurface mountableOption to set delays for outputs during alarmButtons for silence resound and resetTwo open collector outputsDisable feature for sounders and zonesVolt-free fire and fault relaysTest feature for installationTwo auxiliary inputs alert input and class change inputSupport for all FireClass 600 and 700 series conventional detectors conventional sounders and VADsSupport for third party devicesPlease note For full details on all the supported devices refer to the EN 54-13 certificate.Fully compliant with EN 54-2 EN 54-4 and is listed as part of the EN 54-13 system certificate

GBP 194.00
1

Fireclass 577.001.038FC 602SBD Conventional 2 Wire Sounder Base

Fireclass 577.001.038FC 602SBD Conventional 2 Wire Sounder Base

Fireclass 577.001.038FC 602SBD Conventional 2 Wire Sounder BaseThe 602SBD Conventuonal 2 Wire Sounder Base provides an additional sounder function on the detection circuit. The Sounder Base should be used with an associated detector. Removal of the detector should not prevent the sounder operating but will flag up a fault at the control panel.It provides eight tone and variable volume settings. This detector base is a two-wire line powered option.Key FeaturesManufactured to EN54 part 3Integral sounder and detector baseVolume and tone adjustable after installationLow Power SynchronisationDo not require use of a standard baseEight tones and variable volume settingsProvides an additional sounder function

GBP 67.82
1

Fireclass Prescient 3 Status Lamp Unit SLU 2

Fireclass Prescient 3 Status Lamp Unit SLU 2

Fireclass Prescient 3 Status Lamp Unit SLU 2The FireClass Prescient 3 SLU 2 Status Lamp Unit is a compact and reliable status indication module designed for seamless integration with fire alarm and suppression systems. It provides clear visual status indication manual release functionality and an AutoManual keyswitch ensuring efficient system control in critical situations.Designed for use in fire suppression and alarm systems the SLU 2 enhances safety and control by providing operators with clear status updates and direct manual intervention capabilities when needed. Its robust design makes it an essential addition to any fire safety setup.Key FeaturesTwo core data link between panel and status unitTwo core power connection between panel and status unitIndication of eventsstatusManual ReleaseAutoManual Keyswitch

GBP 395.00
1

Fireclass 508.070.002FC FCG Software Licence 2-4 Panel

Fireclass 508.070.002FC FCG Software Licence 2-4 Panel

Fireclass 508.070.002FC FCG Software Licence 2-4 PanelThe 508.070.002FC is a FCG Software Licence 2-4 Panel.Fireclass Graphics is a new clientserver emergency management system and fire detection graphical user interface designed for use with the FC32 64 and 240 control panels.Fireclass Graphics is a Windows-based graphical interface with a high-resolution colour display and provides annunciation and status of the complete Fireclass detection system using the latest FireClass digital technology and helps monitor and manage an emergency in the event a fire is detected.These pieces of fire detection equipment from Fireclass come with the Fireclass Graphics fire management software which is compatible for between one and four fire alarm panels the network card TLI800EN which links all fire controllers together and a power supply unit.Key FeaturesAdditional software license

GBP 458.33
1

Fireclass 577.001.036FC 602SB Conventional 2 Wire Sounder Base

Fireclass 577.001.036FC 602SB Conventional 2 Wire Sounder Base

Fireclass 577.001.036FC 602SB Conventional 2 Wire Sounder BaseThe 602SB Conventional Sounder Bases provide an additional sounder function on collective fire detection circuits. They operate independently of the detector circuit and may be used without an associated detector.The 602SB Sounder Base may be used with or without an associated detector. When used with an associated detector removal of any detector or loss of power to the detection circuit may cause the sounder to cease operating. When used without an associated detector the wiring should be as shown in the alternate wiring scheme. It also provides eight tone and variable volume settings.This detector base is a two-wire line powered option.The 602SB provides the same tone specifications as the 601SB but is powered by a 2-wire detector loop. It is identified by a yellow park clip.Key FeaturesOperating Voltage LoopCircuitStandby Current 100A dumb mode 1.5mA intelligent modeAlarm Current 1.2mA 68dBA low vol 6.8mA 90dBA max volOperating Temp -25C to 70CRelative Humidity 10 to 95 non cond.Dimensions 108 dia x 38 mmWeight 195gWire Size 1.5mm2 to 2.5mm2

GBP 51.47
1

Fireclass 517.001.302FC MTL5561 2 Channel Galvanic Isolator

Fireclass 517.001.302FC MTL5561 2 Channel Galvanic Isolator

Fireclass 517.001.302FC MTL5561 2 Channel Galvanic IsolatorThe MTL5561 is a loop-powered 2channel interface for use with conventional fire and smoke detectors located in hazardous areas. In operation the triggering of a detector causes a corresponding change in the safearea current. The unit features reverse input polarity protection while no-fail earth fault detection on either line can be provided by connecting an earth leakage detector to terminal 3 andor 6. This galvanic isolator is CE marked and replaces the MTL3043 barrier option. It is suitable for connecting loads in Zone 0 IIC T4-T6 hazardous areas if suitably certified.The MTL5500 range of isolators provide intrinsically safe IS communication and signal conditioning for a wide range of hazardous-area devices. Total AC and DC isolation exists between input output and power supply on separately powered units and between input and output on loop-powered units. No IS earth is required. DIN-rail mounting and plug-in signal and power connectors simplify installation and maintenance.Key FeaturesBarrier Type GalvanicNumber of Channels 2Supply Voltage 6 - 30 V dcSafety Voltage Maximum 28 VSafety Current Maximum 42mASignal Type AnalogueMinimum Operating Temperature -20CMaximum Operating Temperature 60COperating Temperature Range -20 - 60 CHazardous Area Certification ATEX

GBP 267.71
1

Fireclass 516.016.027FC Digital Interface 2-Zone Monitor Module

Fireclass 516.016.027FC Digital Interface 2-Zone Monitor Module

Fireclass 516.016.027FC Digital Interface 2-Zone Monitor ModuleA Unique and Flexible dual zone Digital LHD Interface Monitor Module offering advanced functionality to traditional Digital LHD systems.A further important addition to Thermocables world leading family of digital linear heat detection technologies the ProReact Interface Monitor Module is designed to work with the ProReact Digital Linear Heat Detection Cable and effectively monitor up to two zones at any one time.The Digital Interface Monitor Module is unique in being approved to the UL864 10th edition standard the most recent revision to the UL standard for fire alarm control panels and accessories. It has been designed and tested against the stringent requirements of the 10th edition including new tests to confirm the integrity of the software in the device. The Digital Interface Monitor Module simultaneously monitors two zones of Digital LHD cable for an alarm or fault condition. If an overheat or fire situation triggers either zone of the Digital LHD cable the Module automatically calculates and displays the distance along the cable in feet and metres to the alarm point. The two zones can operate independently of each other or in interlockcoincidence detection mode to eliminate the possibility of false alarms.The Module is intended to be installed between the Digital Linear Heat Detection cable and a conventional or addressable fire alarm control panel. An RS-485 Modbus RTU output also allows direct connection into a PLC or other process control system.Typical ApplicationsPower generation industriesOil and gas industriesMinesCold storage and industrial freezersFloating roof storage tanksTunnelsCable traysWarehousingKey FeaturesAdvanced functionality for traditional Digital LHD systemsPinpoints exact location of an incident and responds immediatelySimultaneous monitoring of up to two zonesPower indicator fault and alarm lights for each zoneVolt-free outputs for fault and alarm corresponding to each zoneCan be connected to an industrial process control system using the two-wire RS485 Modbus RTU outputBuilt-in sounder for audible annunciationInterlockCoincidence detection eliminates the possibility of false alarms by requiring both LHD cables to trigger before transmitting an alarmUL CE RoHS approved to meet end user specificationsSimultaneous monitoring of up-to two zones increases potential applications. For example pre-alarm on one zonealarm on the other fault-tolerant triggering of alarm both zones must activate before alarm at panelImmediately pinpoints exact location and responds to an incidentCompatible with Thermocables ProReact Digital LHD cableCan be retro-fitted to existing installationsCost effectively increases functionality and performanceConnects to addressable fire alarm control panels for fast response to faultsLow installation and maintenance costs reduce total cost of ownershipReliability through design approvals and 3 year warranty

GBP 515.16
1

Fireclass FC702S 1-2 Loop Touchscreen Fireclass Control Panel

Fireclass FC702S 1-2 Loop Touchscreen Fireclass Control Panel

Fireclass FC702S 1-2 Loop Touchscreen Fireclass Control PanelThe FireClass range of fire alarm control panels provide a great deal of flexibility in terms of hardware configuration scalability and feature set. They are easy to operate easy to install easy to service and provide the system designer with a wide range of practical engineering solutions. Remote connectivity and backwards compatibility make it a future proof investment with long term support and reduced life time cost.The two loop addressable panel from FireClass is a highly featured digital addressable fire alarm system with an advanced TFT colour touch-screen user interface that is ergonomically engineered specifically for fire alarm control. Operation of the touch screen is possible with or without gloves and provides easy-to-use intuitive user controls including keyless log-on using RFID cards.The FC702S is housed in a compact shallow enclosure whilst the FC702D has a deep housing to accommodate larger batteries for extended standby periods. Each panel can support 250 addresses in total and panels can be seamlessly networked together making it suitable for a range of applications.The robust FireClass loop protocol can operate in the harshest of environments. Essential for system upgrades existing cables can be reused significantly reducing the cost of replacing a system. Ample loop power is available to meet the increasing demand for visual alarms in addition to traditional audible alarms. Practicalities such as the layout of a building or the number of alarm devices will often dictate the useable size of a detection loop and can result in unused capacity and the need for additional hardware.In order to optimise loop capacity FireClass offers a system design solution. Each addressable loop can be connected as one high power HP loop or two shared power SP loops. This provides the system designer the flexibility of allocating all available power and 250 addresses to the HP loop or to share resources across two SP loops. This level of optimisation can significantly reduce total installed system cost.Key Features8.4 TFT colour touch screen multilingual user interface -architecturally attractive and fully programmableErgonomic Icon Display - simple to operate user interface eliminates operator errorsTouch sensitive status LEDs provide event summary information - instant access to detailed event informationContext sensitive help and on screen operator instructions - reduces the need for user training and provides support for infrequent usersUser configurable on screen site maps - no need for additional site plansProgrammable graphic quiescent display - opportunity for customer brandingComprehensive point management and disable functions - gives the user full control and reduces service and maintenance effortSelectively view or print from the extensive 10000 event log using dynamic filters - effective event diagnostics to quickly resolve site investigationsKeyless log-on using RFID tags identifies and logs user actionsFlexible single or dual hardware loop configurations - optimise loop power and address capacityCompact shallow housing or deep housing - designed for standard or extended battery standby period

GBP 1384.00
1

Fireclass FC702D 1-2 Loop Touchscreen Fireclass Control Panel Deep Enclosure

Fireclass FC702D 1-2 Loop Touchscreen Fireclass Control Panel Deep Enclosure

Fireclass FC702D 1-2 Loop Touchscreen Fireclass Control Panel Deep EnclosureThe FireClass range of fire alarm control panels provide a great deal of flexibility in terms of hardware configuration scalability and feature set. They are easy to operate easy to install easy to service and provide the system designer with a wide range of practical engineering solutions. Remote connectivity and backwards compatibility make it a future proof investment with long term support and reduced life time cost.The two loop addressable panel from FireClass is a highly featured digital addressable fire alarm system with an advanced TFT colour touch-screen user interface that is ergonomically engineered specifically for fire alarm control. Operation of the touch screen is possible with or without gloves and provides easy-to-use intuitive user controls including keyless log-on using RFID cards.The FC702S is housed in a compact shallow enclosure whilst the FC702D has a deep housing to accommodate larger batteries for extended standby periods. Each panel can support 250 addresses in total and panels can be seamlessly networked together making it suitable for a range of applications.The robust FireClass loop protocol can operate in the harshest of environments. Essential for system upgrades existing cables can be reused significantly reducing the cost of replacing a system. Ample loop power is available to meet the increasing demand for visual alarms in addition to traditional audible alarms. Practicalities such as the layout of a building or the number of alarm devices will often dictate the useable size of a detection loop and can result in unused capacity and the need for additional hardware. In order to optimise loop capacity FireClass offers a system design solution.Each addressable loop can be connected as one high power HP loop or two shared power SP loops. This provides the system designer the flexibility of allocating all available power and 250 addresses to the HP loop or to share resources across two SP loops. This level of optimisation can significantly reduce total installed system cost.Key Features8.4 TFT colour touch screen multilingual user interface -architecturally attractive and fully programmableErgonomic Icon Display - simple to operate user interface eliminates operator errorsTouch sensitive status LEDs provide event summary information - instant access to detailed event informationContext sensitive help and on screen operator instructions - reduces the need for user training and provides support for infrequent usersUser configurable on screen site maps - no need for additional site plansProgrammable graphic quiescent display - opportunity for customer brandingComprehensive point management and disable functions - gives the user full control and reduces service and maintenance effortSelectively view or print from the extensive 10000 event log using dynamic filters - effective event diagnostics to quickly resolve site investigationsKeyless log-on using RFID tags identifies and logs user actionsFlexible single or dual hardware loop configurations - optimise loop power and address capacityCompact shallow housing or deep housing - designed for standard or extended battery standby period

GBP 1474.70
1

Fireclass 508.031.752FC BAW50T-24 PSU 24V 1.8A Extended Input Voltage Range

Fireclass 508.031.752FC BAW50T-24 PSU 24V 1.8A Extended Input Voltage Range

Fireclass 508.031.752FC BAW50T-24 PSU 24V 1.8A Extended Input Voltage RangeThe508.031.752FCis a power supply unit and battery charger to use with appliances that require a regulated voltage of 27.6 V and a maximum current of 55 A. Its power output is protected against overload short-circuit and accidental inversion of the battery polarity.Key FeaturesInput Voltage 240 Vac -15 10 5060HzOutput Voltage 27.6Vdc -1 1Max. battery size chargeBAQ35T24 2 x 12V - 7Ah maxBAQ60T24 2 x 12V - 15Ah maxBAQ140T24 2 x 12V - 15Ah maxInput Voltage 240 Vac -15 10 5060Hz110Vac -1510 60Hz for BAWOperating Temperature -5 to 40CDimensions 38H x 205W x 98D mmWeight 0.7Kg

GBP 47.18
1

Fireclass 508.031.753FC BAW75T-24 PSU 24V 2.7A Extended Input Voltage Range

Fireclass 508.031.753FC BAW75T-24 PSU 24V 2.7A Extended Input Voltage Range

Fireclass 508.031.753FC BAW75T-24 PSU 24V 2.7A Extended Input Voltage RangeThe508.031.753FCis a power supply unit and battery charger to use with appliances that require a regulated voltage of 27.6 V and a maximum current of 55 A. Its power output is protected against overload short-circuit and accidental inversion of the battery polarity.Key FeaturesInput Voltage 240 Vac -15 10 5060HzOutput Voltage 27.6Vdc -1 1Max. battery size chargeBAQ35T24 2 x 12V - 7Ah maxBAQ60T24 2 x 12V - 15Ah maxBAQ140T24 2 x 12V - 15Ah maxInput Voltage 240 Vac -15 10 5060Hz110Vac -1510 60Hz for BAWOperating Temperature -5 to 40CDimensions 38H x 205W x 98D mmWeight 0.7Kg

GBP 60.00
1

Fireclass 508.032.731FC Fireclass Essential 4 Zone Panel

Fireclass 508.032.731FC Fireclass Essential 4 Zone Panel

Fireclass 508.032.731FC Fireclass Essential 4 Zone PanelThe Fireclass Essential Panel range is an EN-approved low cost conventional panels that are available in both 2 Zone and 4 Zone variants. The panels can support up to 128 devices with a maximum of 32 devices on each zone. The panels are approved to EN 54-2 EN 54-4 and listed as part of the EN 54-13 system certificate.The panel UI has the following features18 LEDs on the 2 Zone Panel and 22 LEDs on the 4 Zone PanelOne piezo buzzer for audible indicationEight push buttons for user inputsKey FeaturesModern and aesthetic designSurface mountableOption to set delays for outputs during alarmButtons for silence resound and resetTwo open collector outputsDisable feature for sounders and zonesVolt-free fire and fault relaysTest feature for installationTwo auxiliary inputs alert input and class change inputSupport for all FireClass 600 and 700 series conventional detectors conventional sounders and VADsSupport for third party devicesPlease note For full details on all the supported devices refer to the EN 54-13 certificate.Fully compliant with EN 54-2 EN 54-4 and is listed as part of the EN 54-13 system certificatePlease note The image is for illustrative purposes only. Please refer to product description.

GBP 213.90
1