Pro1.pl | See the cheapest prices and offers on !URL

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable Entry

Carrier C-94DB Deep Base for I-9403 I-9404 C-9403 C-9404 for Surface Cable EntryThe C-94DB is a deep surface mounting sounder backbox for use with a range of addressable and conventional sounders and beacons.The C-94DB is suitable for use with the following productsI-9403 Intelligent Sounder BeaconI-9404 Intelligent SounderC-9403 Conventional Sounder BeaconC-9404 Conventional Sounder

GBP 9.14

1

Carrier DZ-03 Standard Detector Base For C-9102 C-9103 I-9102 I-9103

Carrier DZ-03 Standard Detector Base For C-9102 C-9103 I-9102 I-9103A standard detector base suitable for use with the I-910x Series Detectors and for C-910x series Detectors.

GBP 3.78

1

Carrier C-9403 Conventional Sounder Beacon

Carrier C-9403 Conventional Sounder BeaconC-9403 Conventional Sounder Strobe is an audible and visible alarm device used to warn people in field when fire occurs. It can give audible and visible alarm signal when applied to external 24VDC power D1 connected with positive and D2 with negative. A 25.5mm high shallow base and a 40mm high deep base are available.Key FeaturesProviding 2 tonesStandard EN 54-3

GBP 27.88

1

Carrier C-9404 Conventional Sounder - 2 Tones

Carrier C-9404 Conventional Sounder - 2 TonesC-9404 Conventional Sounder is an audible alarm device used to warn people in field when fire occurs. It can give audible alarm signal when applied to external 24VDC power D1 connected with positive and D2 with negative.A 25.5mm high shallow base and a 40mm high deep base are available.Key FeaturesProviding 2 tonesStandard EN 54-3

GBP 23.38

1

Carrier C-9602LW-NG Conventional Natural Gas Detector - 220VAC cw Local Buzzer Alarm and Relay

Carrier C-9602LW-NG Conventional Natural Gas Detector - 220VAC cw Local Buzzer Alarm and RelayThe C-9602LW-NG Conventional Gas Detector is wall-mounted designed to check and monitor natural gas of leakage in such applications as houses hotels and apartments.The detector adopts semiconductor gas sensitive components enabling stable operation and simple installation. Its powered by AC 220V.Key FeaturesAvailable for LPG Natural Gas and Coal gasSelf-diagnosis function can monitor the inner faultBuilt-in relay contacts for control Gas ValveExtract etcBuilt-in SounderManual reset and control of relays contactWall mounting. Easy installation and connection220 VAC supply

GBP 56.59

1

Carrier I-9403 Intelligent SounderVisual Indicator - 24VDC

Carrier I-9403 Intelligent SounderVisual Indicator - 24VDCI-9403 Intelligent Sounder Strobe is an audible and visual alarm device installed in field which can be activated by fire alarm control panel in fire control centre. After activated it will generate strong audible and visual alarm signal to warn people in field.A 25.5mm high shallow base and a 40mm high deep base are available. The sounder strobe comes with the shallow base. The deep base C-94DB should be ordered separately.Key FeaturesProviding 16 tonesUsing ultra bright LEDs as source for light indicationOptional transparent colourless lens C-94WL availableLoop powered or external 24V poweredPower-saving consumption mode and normal consumption mode factory defaultSingledual address programmableWorking modes sounder strobe strobe only sounder onlyStandard EN 54-3

GBP 48.52

1

Carrier GST102A Conventional CIE - 2 Zone

Carrier GST102A Conventional CIE - 2 ZoneThe GST102A is a 2 zone conventional fire alarm control panel from GST. This panel is LPCB approved and ideal for small sized fire alarm system installations.This Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2. Its compatible with GST C-9403 Conventional Sounder Strobe designed by EN 54-3 C-9103 Conventional Rate of Rise and Fixed Temperature Heat Detector by EN 54-5 C-9102 Conventional Photoelectric Smoke Detector by EN 54-7 and DC-9204 Conventional Manual Call Point by EN 54-11. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.Key Features4 sounder outputs 1 alarm output and 1 fault outputAble to report short circuit and open circuit of detection zones sounder outputs and alarm outputDesigned with standby batteries and space provision for two sealed lead-acid batteriesTest and disable functionsDaynight mode settableProgrammable on manual call point connection sound modes sounder delay modes and output delay modesThree access levels settable via a key switch and an internal switchReserved repeater panel interface for fire alarm indication of multiple zonesProviding external ports includes RESET SILENCE EVAC and forced Night Mode

GBP 162.32

1

Carrier DC408R4.7 Floor Mount Roller Shutter Contact 2m Armoured Cable

Carrier DC408R4.7 Floor Mount Roller Shutter Contact 2m Armoured CableFloor mount roller shutter contact 2M armoured cable NC 34mm gap 4K7 resistors Grade 3 and Vds C approvedThe grade 3 magnetic contacts are high security contacts which do meet the following requirements preciseness of opening distance magnet polarisation strength of the magnet.Key FeaturesEN 50131-2-6 Grade 3 and VDS certified2m cableTamper protectedBuilt in 4k7 EOL resistor

GBP 64.84

1

Carrier GST108A Conventional CIE - 8 Zone

Carrier GST108A Conventional CIE - 8 ZoneThe GST108A is a 8 zone conventional fire alarm control panel from GST. This panel is LPCB approved and ideal for small sized fire alarm system installations.GST102A104A108A116A Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2. Its compatible with GST C-9403 Conventional Sounder Strobe designed by EN 54-3 C-9103 Conventional Rate of Rise and Fixed Temperature Heat Detector by EN 54-5 C-9102 Conventional Photoelectric Smoke Detector by EN 54-7 and DC-9204 Conventional Manual Call Point by EN 54-11. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.Key Features2 to 16 zones can be detected compatible with conventional detectors and manual call points. Each of the 16 detection zones can be individually configured as maximum 15 conventional detectors. The total number of detectors and manual call points in a zone shall not exceed 324 sounder outputs 1 alarm output and 1 fault outputAble to report short circuit and open circuit of detection zones sounder outputs and alarm outputDesigned with standby batteries and space provision for two sealed lead-acid batteriesTest and disable functionsDaynight mode settableProgrammable on manual call point connection sound modes sounder delay modes and output delay modesThree access levels settable via a key switch and an internal switchReserved repeater panel interface for fire alarm indication of multiple zonesProviding external ports includes RESET SILENCE EVAC and forced Night Mode

GBP 270.60

1

Carrier GST116A Conventional CIE - 16 Zone

Carrier GST116A Conventional CIE - 16 ZoneThe GST116A is a 16 zone conventional fire alarm control panel from GST. This panel is LPCB approved and ideal for small sized fire alarm system installations.GST102A104A108A116A Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2. Its compatible with GST C-9403 Conventional Sounder Strobe designed by EN 54-3 C-9103 Conventional Rate of Rise and Fixed Temperature Heat Detector by EN 54-5 C-9102 Conventional Photoelectric Smoke Detector by EN 54-7 and DC-9204 Conventional Manual Call Point by EN 54-11. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.Key Features2 to 16 zones can be detected compatible with conventional detectors and manual call points. Each of the 16 detection zones can be individually configured as maximum 15 conventional detectors. The total number of detectors and manual call points in a zone shall not exceed 324 sounder outputs 1 alarm output and 1 fault outputAble to report short circuit and open circuit of detection zones sounder outputs and alarm outputDesigned with standby batteries and space provision for two sealed lead-acid batteriesTest and disable functionsDaynight mode settableProgrammable on manual call point connection sound modes sounder delay modes and output delay modesThree access levels settable via a key switch and an internal switchReserved repeater panel interface for fire alarm indication of multiple zonesProviding external ports includes RESET SILENCE EVAC and forced Night Mode

GBP 357.20

1

Carrier GST104A Conventional CIE - 4 Zone

Carrier GST104A Conventional CIE - 4 ZoneThe GST104A is a 4 zone conventional fire alarm control panel from GST. This panel is LPCB approved and ideal for small sized fire alarm system installations.GST102A104A108A116A Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2. Its compatible with GST C-9403 Conventional Sounder Strobe designed by EN 54-3 C-9103 Conventional Rate of Rise and Fixed Temperature Heat Detector by EN 54-5 C-9102 Conventional Photoelectric Smoke Detector by EN 54-7 and DC-9204 Conventional Manual Call Point by EN 54-11. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.Key Features2 to 16 zones can be detected compatible with conventional detectors and manual call points. Each of the 16 detection zones can be individually configured as maximum 15 conventional detectors. The total number of detectors and manual call points in a zone shall not exceed 324 sounder outputs 1 alarm output and 1 fault outputAble to report short circuit and open circuit of detection zones sounder outputs and alarmoutputDesigned with standby batteries and space provision for two sealed lead-acid batteriesTest and disable functionsDaynight mode settableProgrammable on manual call point connection sound modes sounder delay modes and output delay modesThree access levels settable via a key switch and an internal switchReserved repeater panel interface for fire alarm indication of multiple zonesProviding external ports includes RESET SILENCE EVAC and forced Night Mode

GBP 188.92

1

Carrier DL-AB_06-200T-EN54 AB Ceiling Speaker - 2x6W diam24 cm

Carrier DL-AB_06-200T-EN54 AB Ceiling Speaker - 2x6W diam24 cmThe DL-AB 06-200T-EN54 is designed with two independent speakers and 100V transformers to enable an economic operation of two separated speaker lines AB-lines for highest security demands. In case of a failure of one speaker line the redundancy of the speakers and the transformers will guarantee unimpaired function.The speaker is also compliant with the British Standard BS 5839 Part 8. The 2x6W powered speaker is equipped with two full-range loudspeakers and two 100V transformer with 3 power adjustments each. The powder coated metal similar in RAL 9010 guarantees long-term stability. For additional safety a 2-pin ceramic connector block thermal fuses are provided and the speaker chassis are impregnated against dampness.Protection class IP 55 secures the speaker against the impact of environmental influences. Quick and easy mounting with spring clamps and short tension distance. The connecting cables can be supplied by 4 rubber grommets in the firedome.This speaker is suitable for a ceiling strength of about 10-45 mm.

GBP 45.80

1

Carrier NS3562-8P-2S-V2 Industrial 8-Port 101001000T 802.3AT POE 2-Port 1001000X SFP Wall Mount Managed Switch -40- 75C

Carrier NS3562-8P-2S-V2 Industrial 8-Port 101001000T 802.3AT POE 2-Port 1001000X SFP Wall Mount Managed Switch -40- 75CThe IFS NS3562-8P-2S-V2 is an Industrial Gigabit PoE Managed flat form factor Switch equipped with eight 101001000Mbps RJ45 ports with PoE 30w capabilities and two 1001000Mbps SFP fibre uplink ports. These are fully managed Layer 2 switches providing a robust industrial hardened design that provides for rapid operational recovery in the event of a network or power system failure.The IFS Industrial Gigabit Managed Switch Series supports advanced features including IEEE 802.1Q VLAN GVRP port link aggregation QoS broadcast storm control and MAC address filtering. The series also includes IGMP snooping and querying multicasting for media operations and bandwidth utilization to fit a variety of applications.Ideal for use in implementing highly fault-tolerant ring and mesh network architectures these switches are well suited for harsh environments such as industrial security factory automation and intelligent transportation systems ITS.With an IP-30 rated enclosure IFS Industrial Gigabit Managed Switches provide a high level of immunity against electromagnetic EMI and radio-frequency RFI interference typically found in industrial environments. This series of switches comply with IEC60068-2-xx standards for free-fall shock and vibration and operate in -40 C to 75 C temperatures found in difficult environments such as plant floors or in curbside traffic control cabinets.Key FeaturesFlat wall mount form factor8-port 101001000Base-T with PoE2-ports SFP fibre 1001000Base-XHigh-performance Switch ArchitectureUp to 20Gbps non-blocking switch fabric9K bytes Jumbo frame support8K MAC address table automatic source address learning and agingIGMP v1v2V3 Snooping up to 255 multicast Groups with IGMPQuerier mode support and MLD v1v2 Snooping up to 255 multicastGroups with MLD Querier mode supportVLAN Support - up to 255 VLANsQuality of Service QoS 802.1p priority 802.1Q VLAN tag DSCPTOS field in IP PacketMAC Filtering and Source IPMAC address port-bindingComplies with IEEE 802.3af IEEE 802.3at Power over Ethernet EndSpan PSE and up to 8 IEEE 802.3af 802.3at devices poweredIP30 metal enclosure DIN Rail and Wall Mount Design complete with magnetic mounting kitWide operating temperature range of -40C 75C

GBP 820.68

1

Carrier NS3552-8P-2S-V2 8-port Gigabit PoE Industrial Managed Switch

Carrier NS3552-8P-2S-V2 8-port Gigabit PoE Industrial Managed SwitchThe IFS NS3552-8P-2S-V2 is an Industrial Gigabit PoE Managed Switch equipped with eight 101001000Mbps RJ45 ports with PoE 30w capabilities and two 1001000Mbps SFP fibre uplink ports. These are fully managed Layer 2 switches providing a robust industrial hardened design that provides for rapid operational recovery in the event of a network or power system failure.The NS3552-8P-2S-V2 simplifies management of your IP video system by providing integration into TruVision Navigator 8.0 and above.The NS3552-8P-2S-V2 can provide information to TruVision Navigator such as ONVIF lables of cameras bandwidth usage per port and POE power control making installation and management IP Video systems simpler and effortless.With an IP-30 rated enclosure IFS Industrial Gigabit Managed Switches provide a high level of immunity against electromagnetic EMI and radio-frequency RFI interference typically found in industrial environments. This series of switches comply with IEC60068-2-xx standards for free-fall shock and vibration and operate in -40 C to 75 C temperatures found in difficult environments such as plant floors or in curbside traffic control cabinets.These switches not only incorporate the industry standard Rapid Spanning Tree Protocol IEEE 802.1w RSTP but also an advanced Industrial Fail-Safe IFS technology accommodating multiple redundant ring topologies and improved network recovery time of less than 20ms. The switches incorporate a redundant power supply system to further enhance network reliability and uptime. Ideal for use in implementing highly fault-tolerant ring and mesh network architectures these switches are well suited for harsh environments such as industrial security factory automation and intelligent transportation systems ITS.Key Features8-port 101001000Base-T with PoE2-ports SFP fibre 1001000Base-XFull support in TruVision Navigator 8 and above.High-performance Switch ArchitectureUp to 20Gbps non-blocking switch fabric9K bytes Jumbo frame support8K MAC address table automatic source address learning and ageingIGMP v1v2V3 Snooping up to 255 multicast Groups with IGMPQuerier mode support and MLD v1v2 Snooping up to 255 multicast Groups with MLD Querier mode supportVLAN Support - up to 255 VLANs groups out of 4094 VLAN IDs MVR Multicast VLAN Registration Voice VLAN MAC-Based VLAN ProtocolBased VLANQuality of Service QoS 802.1p priority 802.1Q VLAN tag DSCPTOS field in IP PacketIEEE 802.3ad LACP Static Trunk Supports 5 groups of 8-Port trunk supportAdvanced SecurityMAC Filtering and Source IPMAC address port-bindingComplies with IEEE 802.3af IEEE 802.3at Power over Ethernet End - Span PSE and up to 8 IEEE 802.3af 802.3at devices poweredCircuit protection prevent power interference between portsRobust Hardened DesignIP30 metal enclosure DIN Rail and Wall Mount DesignWide operating temperature range of -40C 75C

GBP 937.42

1

Carrier NS3550-8T-2S-V2 8-port 2-SFP Industrial Gigabit Managed Switch

Carrier NS3550-8T-2S-V2 8-port 2-SFP Industrial Gigabit Managed SwitchThe IFS NS3550-8T-2S-V2 is an Industrial Gigabit Managed Switch equipped with eight 101001000Mbps RJ45 ports and two 1001000Mbps SFP fibre uplink ports. These are fully managed Layer 2 switches providing a robust industrial hardened design that provides for rapid operational recovery in the event of a network or power system failure.The IFS Industrial Gigabit Managed Switch Series supports advanced features including IEEE 802.1Q VLAN GVRP port link aggregation QoS broadcast storm control and MAC address filtering. The series also includes IGMP snooping and querying multicasting for media operations and bandwidth utilization to fit a variety of applications. Via aggregation of supporting ports the series allows the operation of highspeed trunk operation combining multiple ports. A maximum of four ports can be assigned for four trunk groups and support fail-over as well. Additionally its standards-compliant implementation ensures interoperability with equipment from other vendors.These switches not only incorporate the industry standard Rapid Spanning Tree Protocol IEEE 802.1w RSTP but also an advanced Industrial Fail-Safe IFS technology accommodating multiple redundant ring topologies and improved network recovery time of less than 20ms. The switches incorporate a redundant power supply system to further enhance network reliability and uptime. Ideal for use in implementing highly fault-tolerant ring and mesh network architectures these switches are well suited for harsh environments such as industrial security factory automation and intelligent transportation systems ITS.With an IP-30 rated enclosure IFS Industrial Gigabit Managed Switches provide a high level of immunity against electromagnetic EMI and radio-frequency RFI interference typically found in industrial environments. This series of switches comply with IEC60068-2-xx standards for free-fall shock and vibration and operate in -40 C to 75 C temperatures found in difficult environments such as plant floors or in curbside traffic control cabinets.Key Features8-port 101001000Base-T2-ports SFP fibre 1001000Base-XRS-232 DB9 console interface for basic switch management and setupHigh-performance Switch ArchitectureUp to 20Gbps non-blocking switch fabric9K bytes Jumbo frame support8K MAC address table automatic source address learning and ageingIGMP v1v2V3 Snooping up to 255 multicast Groups with IGMPQuerier mode support and MLD v1v2 Snooping up to 255 multicast Groups with MLD Querier mode supportVLAN Support - up to 255 VLANs groups out of 4094 VLAN IDs MVR Multicast VLAN Registration Voice VLAN MAC-Based VLAN Protocol Based VLANQuality of Service QoS 802.1p priority 802.1Q VLAN tag DSCPTOS field in IP PacketIEEE 802.3ad LACP Static Trunk Supports 5 groups of 8-Port trunk supportAdvanced SecurityMAC Filtering and Source IPMAC address port-bindingCircuit protection prevent power interference between portsRobust Hardened DesignIP30 metal enclosure DIN Rail and Wall Mount DesignWide operating temperature range of -40C 75C

GBP 542.74

1

Carrier DC418 EN Grade IV Surface Mount Magnetic Contact 4m

Carrier DC418 EN Grade IV Surface Mount Magnetic Contact 4mThe magnetic detector DC418 which is certified according to the requirements of EN 50131-2-6 grade 4 and VdS Class C allows for contact-free opening monitoring of doors and windows in accordance with the highest security requirement specifications. Compared to other high-security magnetic detectors this product also has enhanced external field monitoring which can be used to detect an abnormally large difference between the code that was applied and the code that was taught in.The ability to teach-in this detector to one of eight different magnet variants at the installation location provides for a higher level of security and allows the system to remain relatively flexible with respect to tolerances. The code is assigned at the installation location and is not already defined for the detector at the factory. If a magnetic component is lost or damaged you can simply replace it with a new one and then teach-in the detector to the new component.According to the EN the connection wires are suitable for the connection of an alarm wire loop. The maximum number of detectors that can be connected in series for the evaluation is based on the maximum permitted values of the relevant alarm system.The electronic switches are potential-free relating to direct current from the rest of the circuit and are closed when not in use.Key FeaturesCertified to the highest possible security standard for magnetic switchesHigh dust and humidity resistance IP67Enhanced external field monitoringAbility to teach-in to one of eight different magnet variantsLED providing feedback for installer during entire teach-in processProtection against removal of the sensor from the installation surface

GBP 227.71

1

Carrier DC428 EN Grade IV Roller Shutter Magnetic Contact - 400cm

Carrier DC428 EN Grade IV Roller Shutter Magnetic Contact - 400cmThe magnetic detector DC428 which is certified according to the requirements of EN 50131-2-6 grade 4 and VdS Class C allows for contact-free opening monitoring of doors and windows in accordance with the highest security requirement specifications.Compared to other high-security magnetic detectors this product also has enhanced external field monitoring which can be used to detect an abnormally large difference between the code that was applied and the code that was taught in.The ability to teach-in this detector to one of eight different magnet variants at the installation location provides for a higher level of security and allows the system to remain relatively flexible with respect to tolerances. The code is assigned at the installation location and is not already defined for the detector at the factory. If a magnetic component is lost or damaged you can simply replace it with a new one and then teach-in the detector to the new component.According to the EN the connection wires are suitable for the connection of an alarm wire loop. The maximum number of detectors that can be connected in series for the evaluation is based on the maximum permitted values of the relevant alarm system.The electronic switches are potential-free relating to direct current from the rest of the circuit and are closed when not in use.Key FeaturesCertified to the highest possible security standard for magnetic switchesHigh dust and humidity resistance IP67Enhanced external field monitoringAbility to teach-in to one of eight different magnet variantsLED providing feedback for installer during entire teach-in processProtection against removal of the sensor from the installation surface

GBP 263.56

1

Brand

Merchant

Price (EUR)