177 results (0,15864 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Advanced MXP-513-200RYF 200 Zone REDYEL Fitted

Advanced MXP-513-200RYF 200 Zone REDYEL Fitted

Advanced MXP-513-200RYF 200 Zone REDYEL FittedThe LED indicator cards are a range of panel mounted peripheral modules that can be added to theMxPro 5series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully support dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location.ApplicationsThe zoneLED indicator card can be fitted to allMxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display. The LED will illuminate when the corresponding zone enters a Fire condition.This next generation in LED technology also allows the LED to be fully programmed. Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more.LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDs3-year warranty as standardFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardware

GBP 468.11
1

Advanced MxPro 5 LED Indication - Zone 200 MXP-513-200RY

Advanced MxPro 5 LED Indication - Zone 200 MXP-513-200RY

Advanced MxPro 5 LED Indication - Zone 200 MXP-513-200RYThe LED indicator cards are a range of panel mounted peripheral modules that can be added to theMxPro 5series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully support dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location.ApplicationsThe zoneLED indicator card can be fitted to allMxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display. The LED will illuminate when the corresponding zone enters a Fire condition.This next generation in LED technology also allows the LED to be fully programmed. Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more.LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDs3-year warranty as standardFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardware

GBP 468.11
1

Advanced Dynamix PC-NET-005-L3 MxPro Graphical Control Software Standard Version - Connectivity of 200 Nodes max

Advanced Dynamix PC-NET-005-L3 MxPro Graphical Control Software Standard Version - Connectivity of 200 Nodes max

Advanced DynamixPC-NET-005-L3 MxPro Graphical Control Software Standard Version - Connectivity of 200 Nodes maxThe Advanced Pc-Net Graphical Control System is highly configurable so that the end user can be presented with site maps text and images in order to monitor the full fire system. Isolation status and analogue values are available by simply selecting icons and devices.Powerful graphical control and indication with historic log and analysis features providing instant report by datetime as well as event type sensor address and operation.The software provides a cost-effective solution for all types of installation and is suitable for use with single panel to multi-site applications.

GBP 9240.18
1

Advanced Dynamix PC-NET-005-L3P MxPro Graphical Control Software Premium Version - Connectivity of 200 Nodes max

Advanced Dynamix PC-NET-005-L3P MxPro Graphical Control Software Premium Version - Connectivity of 200 Nodes max

Advanced Dynamix PC-NET-005-L3P MxPro Graphical Control Software Premium Version - Connectivity of 200 Nodes maxThe Advanced Pc-Net Graphical Control System is highly configurable so that the end user can be presented with site maps text and images in order to monitor the full fire system. Isolation status and analogue values are available by simply selecting icons and devices.Powerful graphical control and indication with historic log and analysis features providing instant report by datetime as well as event type sensor address and operation.The software provides a cost-effective solution for all types of installation and is suitable for use with single panel to multi-site applications.

GBP 11385.42
1

Advanced MxPro 5 MXP-513L-200RY 200 Zone Large Enclosure REDYEL

Advanced MxPro 5 MXP-513L-200RY 200 Zone Large Enclosure REDYEL

Advanced MxPro 5 MXP-513L-200RY 200 Zone Large Enclosure REDYELThe LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 5series of control panels.The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully supports dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location. Applications The zoneLED indicator card can be fitted to all MxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display.The LED will illuminate when the corresponding zone enters a Fire condition. This next generation in LED technology also allows the LED to be fully programmed.Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more. LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDsFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardware

GBP 466.64
1

Advanced MxPro 5 MXP-513L-200RYF 200 Zone Large Enclosure REDYEL Fitted

Advanced MxPro 5 MXP-513L-200RYF 200 Zone Large Enclosure REDYEL Fitted

Advanced MxPro 5 MXP-513L-200RYF 200 Zone Large Enclosure REDYEL FittedThe LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 5series of control panels.The display cards are available in numerous configurations and provide individual indication of the zones in Fire by default but are also fully programmable.The units fully supports dynamic zoning on networked or larger standalone systems and can be used to provide individual zonal LED indication at one location. Applications The zoneLED indicator card can be fitted to all MxPro 5control panels to provide indication of the zones in fire in addition to the panel graphical display.The LED will illuminate when the corresponding zone enters a Fire condition. This next generation in LED technology also allows the LED to be fully programmed.Each LED can now operate in accordance with the cause-and-effect strategy in which the LED can illuminate upon Fault Isolation Output Group plus many more. LED cards can now be ordered with Red and Yellow LED arrangements or provided with bi-colour LEDs with slide-in labels to assist identifying the origin of the condition.Key FeaturesProgrammable LEDsFactory fitted or retro-fitSupports dynamic zoningFully programmableCost effective against ancillary hardwareFitted

GBP 466.64
1

Advanced MXP-013-100 MxPro 100 Zone LED Card for MX-4200 4400 4800 Retro-fit

Advanced MXP-013-100 MxPro 100 Zone LED Card for MX-4200 4400 4800 Retro-fit

AdvancedMXP-013-100MxPro 100 Zone LED Card for MX-4200 4400 4800 with Door Label Retro-fit -MXP-013-100The Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 491.29
1

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door amp Label Retro-Fit

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door amp Label Retro-Fit

Advanced MXP-013-050 50 Zone LED Card for MX-4200 4400 with Door Label Retro-FitThe Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 355.63
1

Advanced MXP-024 MxPro 20 Zone LED Card for MX-4100

Advanced MXP-024 MxPro 20 Zone LED Card for MX-4100

Advanced MXP-024 MxPro 20 Zone LED Card for MX-4100The Zonal LED indicator cards are a range of panel mounted peripheral modules that can be added to the MxPro 4 series of control panels. The display cards are available in numerous configurations and provide individual indication of the zones in fire.The units fully support dynamic zoning on networked or larger stand-alone systems and can be used to provide individual zonal LED indication at one location. 20 zone units are available which are fitted to the front display plate on the MxPro 4 series control panel. The Mxp-013-050F Mxp-013-100F and Mxp-013-200F incorporate 50 100 or 200 LED indicators respectively and are compatible with all MxPro 4 series multiloop panels.FeaturesThe cards are capable of simultaneously displaying all zones in a fire condition and incorporate a unique power saving feature to minimise the power drawn from the control panel in the event of a major fire. Several other options are also available within the MxPro 4 range for applications where indication of fire signals from zones in addition to the panels graphical display is required. These options include Advanced Mimic Units graphical systems and printers.Key FeaturesUp to 200 zones available3 year warranty as standardFactory fitted or retro fitDynamic zoningCost effective against ancillary hardware

GBP 76.08
1

Advanced MXP-503 Standard Network Card MxPro5

Advanced MXP-503 Standard Network Card MxPro5

Advanced MXP-503 Standard Network Card MxPro5The Ad-NeT network system allows all MxPro5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector-based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control PanelStandard NetworkThe maximum total cable length is 1.5km. The maximum number of network nodes is 32 50 with signal bufferFault Tolerant NetworkThe maximum cable length is 1.5km between each node and the maximum total loop length is 20km. Each network card has in-built diagnostics and is fully monitored for both short and open circuit faults between nodes. The network is capable of withstanding a single fault between nodes without loss of communications to any single panel. The maximum number of network nodes is 200.

GBP 234.06
1

Advanced MXP-509 Fault Tolerant Network Card MxPro 5

Advanced MXP-509 Fault Tolerant Network Card MxPro 5

Advanced MXP-509 Fault Tolerant Network Card MxPro 5The Ad-NeT network system allows all MxPro 5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro 5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro 5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector-based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control PanelStandard NetworkThe maximum total cable length is 1.5km. The maximum number of network nodes is 32 50 with signal bufferFault Tolerant NetworkThe maximum cable length is 1.5km between each node and the maximum total loop length is 20km. Each network card has in-built diagnostics and is fully monitored for both short and open circuit faults between nodes. The network is capable of withstanding a single fault between nodes without loss of communications to any single panel. The maximum number of network nodes is 200.

GBP 584.40
1

Advanced Mxp-009 - Fault Tolerant Network Card MxPro 4

Advanced Mxp-009 - Fault Tolerant Network Card MxPro 4

Advanced Mxp-009 - Fault Tolerant Network Card MxPro 4The Network cards are compatible with all Mx Ax series control panels. The Remote Terminals RCT RDT Mxp-010 BMS Graphics interface and other network peripherals such as Advanced Mimic Units AMU all have integral network cards built-in. Only use fault tolerant Peripherals and Remote Terminals on a fault tolerant network. The Standard Network Card is supported on all panels from software version 015 onwards. The Fault Tolerant Network Card is supported on all panels from software version 018 onwards.Key FeaturesTrue Peer to PeerLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control Panel

GBP 701.90
1

Advanced Mxp-003 Standard Network Card MXPro 4

Advanced Mxp-003 Standard Network Card MXPro 4

Advanced Mxp-003 Standard Network Card MXPro 4The Network cards are compatible with all Mx Ax series control panels. The Remote Terminals RCT RDT Mxp-010 BMS Graphics interface and other network peripherals such as Advanced Mimic Units AMU all have integral network cards built-in. Only use fault tolerant Peripherals and Remote Terminals on a fault tolerant network. The Standard Network Card is supported on all panels from software version 015 onwards. The Fault Tolerant Network Card is supported on all panels from software version 018 onwards.Key FeaturesTrue Peer to PeerLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control Panel

GBP 324.35
1

Advanced MxPro5 MXP-503F Network Card - Standard Fitted

Advanced MxPro5 MXP-503F Network Card - Standard Fitted

Advanced MxPro5 MXP-503F Network Card - Standard FittedThe Ad-NeT network system allows all MxPro 5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable. It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200 panel wide area networked system.The network operates as a true peer-to peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro 5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro 5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time. All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning.For more complex systems the Windows based PC-NeT Mx configuration software allows sector based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions. All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis. For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control Panel

GBP 234.06
1

Advanced MxPro5 MXP-509F Network Card - Fault Tolerant Fitted

Advanced MxPro5 MXP-509F Network Card - Fault Tolerant Fitted

Advanced MxPro5 MXP-509F Network Card - Fault Tolerant FittedThe Ad-NeT network system allows all MxPro 5 series control panels remote terminals and network peripherals to be connected together using standard fire resistant two-core cable.It provides both the benefits of distributed intelligence and reduced installation costs whilst catering for the smallest two-panel network through to the largest 200-panel wide area networked system.The network operates as a true peer-to-peer system allowing information from any input or output device to be passed over the network and displayed on any MxPro 5 control panel or remote terminal as required.Simply adding and connecting a network card allows any MxPro 5 control panel or remote terminal to be networked. All other nodes on the Ad-NeT system will be instantly aware of a panel as soon as it is given a valid network node address allowing additional panels to be added at any time.All panels incorporate a network analyser providing valuable diagnostic and status information and also have the facility to prevent the transmission of fires or faults during commissioning. For more complex systems the Windows-based PC-NeT Mx configuration software allows sector based programming for Mute Silence Resound and Reset control keys as well as investigation delays group disablement and test instructions.All panels within the same sector will share common controls and each panel or remote terminal can also be programmed to show specific network information on a zonal basis.For cause and effect any input device can be programmed to operate any output device on any panel.Key FeaturesLarge Ad-NeT 200 Panel NetworkUp to 1.5Km between Control PanelsWindows based PC setupNetwork Systems share up to 1000 zonesNetwork Analysis from Control Panel

GBP 584.40
1

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052

Advanced MxPro 10 Way Mimic Relay Card - Mxp-052The Mxp-052 is a peripheral relay card providing ten 30V DC 1A programmable relay outputs. The Mxp-052 connects directly to any of the DIL connectors of either the Network Mimic Mxp-020-100 LED Output Card or the General IO controller Mxp-045 LED Output Card units via the supplied ribbon cable.Each output follows the cause and effect programming of the mimic unit output. This can be either a simple zone output or can be an individually programmed output group rule utilising the full range of features of the Mx-40005000 systems Dynamix zoning facilities.Key FeaturesTen change-over contact outputs rated at 30V DC 1A.Up to 200 individual relay outputs fully programmable per mimic excluding LEDsTen individually programmable relay outputs per unitDIN rail or screw fixing optionsSeparate isolate input disables all outputsSeparate isolate indication outputFast instant responseProduct CodesDescriptionMXP-052Mimic driven 10-way relay output cardMXP-052-DINMimic driven 10-way relay output card in din-rail carrier

GBP 129.16
1

Advanced 50 Way Network IO Controller MXP-045

Advanced 50 Way Network IO Controller MXP-045

50 Way Network IO ControllerMXP-045The MXP-045 provides a convenient and cost-effective solution where multiple inputs and outputs are required. It is ideally suited for building control functions such as damper fan control or sprinkler control where OnOffAuto control and healthyfault or openclosed status indication is required.The inputs can be configured as toggle switch or momentary push-button types. The outputs are fully programmable using the powerful DynamiX cause and effects rules for output groups 1-50.In addition to the 50 IO circuits dedicated inputs and outputs are also provided. Status outputs include General Fire Fault Disablement and Test. A buzzer is also provided for audible annunciation of status changes. Inputs include Buzzer Mute Momentary input enable reset and LED Test.The 50-Way Network IO controller is a stand-alone unit withwithout its own EN54-4 power supply and charger. Each input and output on the card is fully programmable using a PC.An additional 100 LED outputs can be provided using the 100-way driver card output groups 101-200.Key Features50 Inputs Outputs availableSupplementary Graphical IndicationZonal or Fully Programmable LED Option3 Year Warranty as standardFully NetworkableFull Colour Mimic Option

GBP 805.42
1

Advanced Lux Intelligent 0-8 Loop Control Panel with Standard Network Card Loop Options

Advanced Lux Intelligent 0-8 Loop Control Panel with Standard Network Card Loop Options

Advanced Lux Intelligent 0-8 Loop Control Panel with Standard Network Card Loop OptionsThe Advanced Lux Intelligent Addressable Emergency Lighting Control System is designed provide a simple yet powerful reliable and cost effective maintenance solution for testing your emergency lights and maintaining results data for inspection and audit purposes.The provision for emergency lighting is a requirement for non-domestic buildings and is embodied in British and European legislation. Employers building owners and occupiers have a legal responsibility to test and maintain their emergency systems to the standards required by the code of practice for emergency Lighting of Premises BS 5266-1 and also EN50172 Emergency Escape Lighting Systems.It supports both maintained non-maintained and slave luminaires in either self-contained central battery or static inverter systems. It supports all of the Advanced Lux Intelligent range of fittings. On top of this Lux Intelligent modules can be added to almost any luminaires to allow them to fully function on the Lux Intelligent system. The control panel has a dynamic event log of 1000 events as well as a separate log for recording of test results. Records of all automatic and manual tests are generated and can be downloaded by connecting to a computer and using the appropriate Lux Intelligent Logger tool.The data is then transferred to a database on a PC for subsequent analysis listing and printing. Once the data is there there is also the opportunity of transferring this information up to the Lux Intelligent cloud using the Lux Intelligent sync tool. Through the Lux Intelligent app it becomes very easy to share and use this information.Key FeaturesEach panel can support 996 luminairesAdvanced graphical LCD user interfaceLoop powered communicationsDedicated RS232 port supporting various modes of access5 Amp power supply and charger to EN54-4Fit and forget panel using your My Lux Intelligent account to manage your emergency lighting32 characters for zone text and 26 for each luminaireNetworks can contain up to 200 panels400 Individual tests can be spread across up to 50 test groupsUp to 200 Zones available across each panel1000 event and diagnostic log 247 monitoring including cloud service and mobile appPanel VariantsLX-98000 to 8 Loop Lux Intelligent Control Panel with standard network card No loop cardsLX-9802Lx-9800 Lux Intelligent Control Panel cw standard network cardTwo loop drivers fittedLX-9803Lx-9800 Lux Intelligent Control Panel cw standard network cardThree loop drivers fittedLX-9804Lx-9800 Lux Intelligent Control Panel cw standard network cardFour loop drivers fittedLX-9805Lx-9800 Lux Intelligent Control Panel cw standard network cardFive loop drivers fittedLX-9806Lx-9800 Lux Intelligent Control Panel cw standard network cardSix loop drivers fittedLX-9807Lx-9800 Lux Intelligent Control Panel cw standard network cardSeven loop drivers fittedLX-9808Lx-9800 Lux Intelligent Control Panel cw standard network cardEight loop drivers fitted

GBP 3103.20
1

Advanced MXP-020-100 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100 100 Way Remote LED Mimic Driver Un-BoxedThe MXP-020-100 is a 100 way programmable remote LED Mimic Driver.The Mimic Controller provides a convenient and cost effective solution to any system that requires supplementary graphical indication of the installation via LED technology.These units unlike a panel mounted LED array which to be meaningful must also have a printed lookup table or picture adjacent to the panel provide an unambiguous graphical representation of the actual zones in fire.The unit can be mounted either internally in a multi-loop control panel or alternatively in a bespoke remote enclosure. Each unit comprises a graphical representation of the installation together with a programmable mimic driver card and LED indicators. The mimic diagram is copied from a standard CAD drawing provided by the client and the finished unit is supplied pre-wired and ready to power-up.Key Features100 programmable LED driver outputs for energising and providingLED indicationExpandable to 200 by installation of an expansion cardSupports the connectivity of 10 Way Relay Output CardLarge full colour graphical indication for site maps building layouts or simply zonal indication.Can be located remotely by simply adding the type of mimic interface onto the Ad-NetAd-NeT NetworkSupplementary graphical indicationZonal or fully programmable LED optionFully networkableFull colour mimic option3 year warranty as standard

GBP 805.42
1

Advanced MXP-020-100FT Fault Tolerant 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100FT Fault Tolerant 100 Way Remote LED Mimic Driver Un-Boxed

Advanced MXP-020-100FT Fault Tolerant 100 Way Remote LED Mimic Driver Un-BoxedThe Mimic Controller provides a convenient and cost-effective solution to any system that requires supplementary graphical indication of the installation via LED technology.These units unlike a panel mounted LED array which to be meaningful must also have a printed lookup table or picture adjacent to the panel provide an unambiguous graphical representation of the actual zones in fire.The unit can be mounted either internally in an MxPro 5 multi-loop control panel or alternatively in a bespoke remote enclosure. Each unit comprises a graphical representation of the installation together with a programmable mimic driver card and LED indicators. The mimic diagram is copied from a standard CAD drawing provided by the client and the finished unit is supplied pre-wired and ready to power-up.Applications LimitationsThe 100 Way Network Mimic Controller is a stand-alone unit with without its own EN54-4 power supply and charger. Each output on the card is fully programmable using a PC programming suite.Key Features100 programmable LED driver outputs for energising and providing LED indicationExpandable to 200 by installation of an expansion cardSupports the connectivity of 10 Way Relay Output CardLarge full colour graphical indication for site maps building layouts or simply zonal indicationCan be located remotely by simply adding the type of mimic interface onto the Ad-NetAd-NeT NetworkSupplementary graphical indicationZonal or fully programmable LED optionFully networkableFull colour mimic option3-year warranty as standard

GBP 1416.31
1

Advanced MXS-031-2T 2-Position Key Switch Trapped for MXP-045

Advanced MXS-031-2T 2-Position Key Switch Trapped for MXP-045

Advanced MXS-031-2T 2-Position Key Switch Trapped for MXP-045The 50 Way Network IO Card provides a convenient and cost-effective solution where multiple inputs and outputs are required.It is ideally suited for building control functions such as damperfan control or sprinkler control where onoffauto control and healthyfault or openclosed status indication is required.The inputs can be configured as a toggle switch or momentary push-button types.The outputs are fully programmable using the powerful dynamic cause and effects rules for output groups 1-50. In addition to the 50 IO circuits dedicated inputs and outputs are also provided.Status outputs include General Fire Fault Disablement and Test.A buzzer is also provided for audible annunciation of status changes. Inputs include buzzer mute momentary input enablereset and LED test. The 50-Way Network IO controller is a stand-alone unit withwithout its own EN54-4 power supply and charger.Each input and output on the card are fully programmable using a PC. An additional 100 LED outputs can be provided using the 100-way driver card output groups 101-200.Key FeaturesOver 50 programmable volt free switchpush button type inputs easily configured via our PC-NET-003 configuration software.Over 50 programmable LED driver outputs for energising and providing LED indication.Large colour graphical indication for site maps building layouts or simply zonal indication.Remote location by simply adding the type of mimic interface onto the Ad-netAd-net Network.Supplementary graphical indicationZonal or fully programmable LED optionFully networkable3-year warranty as standard

GBP 66.13
1

Advanced MxPro5 MXP-045FT 50 Way Fault-Tolerant Network IO Controller Un-Boxed

Advanced MxPro5 MXP-045FT 50 Way Fault-Tolerant Network IO Controller Un-Boxed

Advanced MxPro5 MXP-045FT 50 Way Fault-Tolerant Network IO Controller Un-BoxedThe 50 Way Network IO Card provides a convenient and cost-effective solution where multiple inputs and outputs are required. It is ideally suited for building control functions such as damperfan control or sprinkler control where onoffauto control and healthyfault or openclosed status indication is required.The inputs can be configured as toggle switch or momentary push-button types. The outputs are fully programmable using the powerful dynamic cause and effects rules for output groups 1-50.In addition to the 50 IO circuits dedicated inputs and outputs are also provided. Status outputs include General Fire Fault Disablement and Test. A buzzer is also provided for audible annunciation of status changes. Inputs include buzzer mute momentary input enable reset and LED test.The 50-Way Network IO controller is a stand-alone unit withwithout its own EN54-4 power supply and charger. Each input and output on the card is fully programmable using a PC.An additional 100 LED outputs can be provided using the 100-way driver card output groups 101-200.Key FeaturesOver 50 programmable volt free switchpush button type inputs easily configured via our PC-NET-003 configuration software.Over 50 programmable LED driver outputs for energising and providing LED indication.Large full colour graphical indication for site maps building layouts or simply zonal indication.Remote location by simply adding the type of mimic interface onto the Ad-netAd-net Network.Supplementary graphical indicationZonal or fully programmable LED optionFully networkable3-year warranty as standard

GBP 1416.31
1

Advanced MXS-031-3U 3-Position Key Switch Un-trapped for MXP-045

Advanced MXS-031-3U 3-Position Key Switch Un-trapped for MXP-045

Advanced MXS-031-3U 3-Position Key Switch Un-trapped for MXP-045The 50 Way Network IO Card provides a convenient and cost-effective solution where multiple inputs and outputs are required.It is ideally suited for building control functions such as damperfan control or sprinkler control where onoffauto control and healthyfault or openclosed status indication is required.The inputs can be configured as a toggle switch or momentary push-button types.The outputs are fully programmable using the powerful dynamic cause and effects rules for output groups 1-50. In addition to the 50 IO circuits dedicated inputs and outputs are also provided.Status outputs include General Fire Fault Disablement and Test.A buzzer is also provided for audible annunciation of status changes. Inputs include buzzer mute momentary input enablereset and LED test. The 50-Way Network IO controller is a stand-alone unit withwithout its own EN54-4 power supply and charger.Each input and output on the card are fully programmable using a PC. An additional 100 LED outputs can be provided using the 100-way driver card output groups 101-200.Key FeaturesOver 50 programmable volt free switchpush button type inputs easily configured via our PC-NET-003 configuration software.Over 50 programmable LED driver outputs for energising and providing LED indication.Large colour graphical indication for site maps building layouts or simply zonal indication.Remote location by simply adding the type of mimic interface onto the Ad-netAd-net Network.Supplementary graphical indicationZonal or fully programmable LED optionFully networkable3-year warranty as standard

GBP 66.13
1

Advanced MXS-031-2U 2-Position Key Switch Un-trapped for MXP-045

Advanced MXS-031-2U 2-Position Key Switch Un-trapped for MXP-045

Advanced MXS-031-2U 2-Position Key Switch Un-trapped for MXP-045The 50 Way Network IO Card provides a convenient and cost-effective solution where multiple inputs and outputs are required.It is ideally suited for building control functions such as damperfan control or sprinkler control where onoffauto control and healthyfault or openclosed status indication is required.The inputs can be configured as a toggle switch or momentary push-button types.The outputs are fully programmable using the powerful dynamic cause and effects rules for output groups 1-50. In addition to the 50 IO circuits dedicated inputs and outputs are also provided.Status outputs include General Fire Fault Disablement and Test.A buzzer is also provided for audible annunciation of status changes. Inputs include buzzer mute momentary input enablereset and LED test. The 50-Way Network IO controller is a stand-alone unit withwithout its own EN54-4 power supply and charger.Each input and output on the card are fully programmable using a PC. An additional 100 LED outputs can be provided using the 100-way driver card output groups 101-200.Key FeaturesOver 50 programmable volt free switchpush button type inputs easily configured via our PC-NET-003 configuration software.Over 50 programmable LED driver outputs for energising and providing LED indication.Large colour graphical indication for site maps building layouts or simply zonal indication.Remote location by simply adding the type of mimic interface onto the Ad-netAd-net Network.Supplementary graphical indicationZonal or fully programmable LED optionFully networkable3-year warranty as standard

GBP 66.13
1