4 results (0,12314 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

EverActive FL-180 Bullet LED Flashlight w. CREE XP-E2 - 120/200 Lumens

EverActive FL-180 Bullet LED Flashlight w. CREE XP-E2 - 120/200 Lumens

EverActive FL-180 Bullet Water Resistant LED Flashlight w. CREE XP-E2 - Function Focus-Beam Adjustment - 120-200 Lumens\n\nThe EverActive FL-180 Flashlight uses a very effective, Original Cree XP-E2 with a nominal power of 3W, which allows you to get more light while maintaining long lighting times. Cree Incorporated is a renowned American manufacturer specializing in the manufacture of high-quality light emitting diodes (LEDs).\n\nThe torch has 3 operating modes: 100\%, 25\%, flashing, lens generating an even luminous flux and the ability to smoothly adjust the light beam. The FL-180 is powered by a single R6/AA/14500 battery. The Everactive FL-180 flashlight housing is made from durable black-painted aluminum, thanks to the rubber O-rings to withstand weathering. A deeply seated switch on the back of the flashlight allows you to use it as a candle (on a flat surface) in case of power failure. The flashlight is equipped with an additional detachable clip/slide for convenient hooking of the flashlight.\n\nSpecifications:\n- Light source: 1x CREE XP-E2, 3W power\n- Light output: 120 lumens for cells 1.2-1.5V, 180-200 lumens for 3.7V cells\n- Power: 1x AA/R6/14500, Alkaline/Ni-MH/Li-ion (not included)\n- Flashlight Housing: Aluminium\n- Dimensions: 94 x 20 x 26mm\n- Resistant to accidental splashing\n\nPacking: Euroblister

EUR 11.70
1

EverActive WL-200 Magnetic Work Light - Aluminium - 200 Lumens

EverActive WL-200 Magnetic Work Light - Aluminium - 200 Lumens

EverActive WL-200 Magnetic Work Light - Aluminium - 200 Lumens, 3W\n\nThe WL-200 is a very small and one-piece, powerful inspection/workshop Torch from the everActive brand. The maximum light output of 200 lumen provides excellent working space illumination even in complete darkness. The undisputed advantage of our flashlight is a very wide, evenly disperzed luminous flux generated from The modern 3W Cob diode.\n\nThe Everactive WL-200 is extremely comfortable to use-a small, yet sturdy housing (the entire body made of metal) hides a modern, EXTRA-large LED-type cob. As a result, the size of the flashlight to the surface and the force of the luminous flux were unfavourably favourable.\n\nErgonomically positioned switch increases the convenience of using the flashlight. The casing is waterproof, sturdy and durable for damage. The torch is equipped with movable, rotating in the range of 180 St. Handle/clip. Two magnets (one in the base, the other in the holder) give additional possibilities of attaching the flashlight.\n\nSpecifications:\n- Light source: 1x COB LED Converter, 3W power\n- Light output: 200 lumen\n- Power: 3x R03 / AAA (not included)\n- Flashlight Housing: Aluminium\n- Dimensions: 162 x 14 x 29mm\n\nPacking: Euroblister

EUR 13.90
1

EverActive CBC-40 Professional Car Battery Charger / Inverter - 12V/24V

EverActive CBC-40 Professional Car Battery Charger / Inverter - 12V/24V

EverActive CBC-40 Professional Car Battery Charger / Inverter - 12V/24V - AGM/GEL/LEAD ACID\n\nEverActive CBC-40 is made in advanced inverter technology, combines the best features of traditional transformer rectifiers and impulse chargers.\n\nThe CBC-40 is the highest model In The EverActive Car Chargers series enclosed in a sturdy metal housing. It is an automatic charger for all types of acid batteries (automotive, etc.) 12V and 24V, gel/AGM with capacities of 25-1000 Ah. It is an extremely powerful rectifier with a boot in a very robust and compact release!\n\nSpecifications:\n- Charging Current (Effective value): 5-40A (infinitely adjustable) For both 12V and 24v batteries\n- Charging current (maximum value): 60A\n- Current for starting aid (maximum value): 300a-For both 12V and 24V batteries\n- Maximum charging voltage: 14.8 V/29v (+ 0.4 V)-The charger ensures full charge of the battery, guarantees the achievement of normal levels of electrolyte density, while reducing the risk of overcharging the battery\n- Supported battery Capacities: from 25 Ah to 1000 Ah\n- Metal solid housing with comfortable handle\n- Effective charging and regeneration of extremely discharged batteries\n- Electronically stabilized output voltage reduces the risk of recharging the battery\n- Battery charging the most secure method: CC (constant current) and after reaching the target voltage by CV method (constant voltage with automatic reduction of the charging current Up To 0A)\n- Fully charged batteries with electrolyte density leveling in the entire battery, automatic desulphurization mode\n- Smooth, infinitely variable (limit) charging current in the Range from 5A To 40A\n- Maintaining a high output voltage, even after the charging is complete, helps to achieve the correct electrolyte density in each battery compartment (leveling charge)\n- The same options for adjusting the output current for both 12V and 24V batteries\n- The device has a massive, fully insulated crocodile connection , with a length of 180 cm\n- After the power is interrupted and THE AC Mains is restarted, the charger will automatically start charging In 12V mode, with the charging current already\n- Charger equipped with digital ammeter, showing the approximate current value of the charging current-allows you to quickly assess the status and battery charge level\n- Supported Batteries: Gel, lead acid, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid, EFB, Ca/Ca, Pb etc\n- Current for start-up aid: Up to 300 A for 12V/24V\n- Dimensions: 160 x 105 x 245mm\n- Weight: 3.5kg\n\nPackage includes:\n- EverActive CBC-40 Professional Car Battery Charger / Inverter\n- Power Cord\n- User Manual\n\nPacking: Euroblister

EUR 162.10
1

EverActive TL-X2 Rear Bike LED Light - 3 Lighting Modes

EverActive TL-X2 Rear Bike LED Light - 3 Lighting Modes

EverActive TL-X2 Rear Bike Light / LED Tail Light with 3 Lighting Modes\n\nEverActive TL-X2 is a high quality rear bicycle light with very bright LED light. Equipped with two 0.5W red LEDs, TL X2 generates the light visible in any even toughest weather conditions: dense fog, strong sunlight, heavy rain, or abundant snowfall. In good conditions light is visible from a distance of 500m! The design of the lamp ensures not only that we will be seen from afar at the rear, but also provides great visibility from the sides-even over 180°.\n\nThe EverActive TL-X2 Tail Light is useful and provides additional safety even after removing from the bike -the lamp housing has a rear clip for hanging on the backpack, bag, belt, etc. The light housing is made of a decent plastic and has been sealed. The circuit breaker is durable and has also been sealed. EverActive TLX2 is powered by two R03/AAA batteries. It has three lighting modes: two fixed and one flashing. Batteries are not included in the set.\n\nFeatures:\n- Extremely strong - two 0.5 watts red LEDs each, offer an exceptionally powerful luminous flux\n- Ideal as a universal warning light, even after removing from the bike-gives the possibility of suspension in the backpack, bag, belt, etc.\n- The unique optical system in the form of complex lenses perfectly dissids the strong beam emitted from the LEDs\n- The lamp, despite its exceptionally high power, does not dazzle other participants of the movement\n- Very durable housing, well sealed with rubber components , resistant to rain or splashing\n- This is the highest quality, uncompromising lamp dedicated to enthusiasts and most demanding users\n\nSpecifications:\n- Light source: 2x Red LED 0.5W\n- Lighting Time: Up to 60 hours\n- Operating modes: 50\% (1 LED), 100\% (2 LEDS), Flashing\n- Power: 2x AAA/R03 (not included)\n- Light Range: up to 500m\n\nPacking: Euroblister

EUR 2.80
1