13 results (0,14096 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Zehnder ComfoAir 200 Luxe Enthalpy

Zehnder ComfoAir 200 Luxe Enthalpy

Zehnder ComfoAir 200 Luxe Enthalpy Product Part Number Zehnder ComfoAir 200 R Luxe Enthalpy - 471229955 Description The Zehnder ComfoAir 200 is a heat recovery unit designed to enable better and easier specification of ventilation in new properties due to its versatility. It can be left or right handed in addition to being ceiling or wall mounted. It contains features such as its automatic true summer by-pass, high heat recovery efficiency and upgradable high grade filters providing a comfortable, healthy and energy-efficient indoor climate.

GBP 2131.07
1

Zehnder ComfoAir 200 Luxe Pre Heater

Zehnder ComfoAir 200 Luxe Pre Heater

Zehnder ComfoAir 200 Luxe Pre Heater Product Part Number Zehnder ComfoAir 200 VR Luxe (with pre-heater) - 471229815 Description The Zehnder ComfoAir 200 is a heat recovery unit designed to enable better and easier specification of ventilation in new properties due to its versatility. It can be left or right handed in addition to being ceiling or wall mounted. It contains features such as its automatic true summer by-pass, high heat recovery efficiency and upgradable high grade filters providing a comfortable, healthy and energy-efficient indoor climate.

GBP 2472.18
1

Zehnder ComfoAir 200 Luxe

Zehnder ComfoAir 200 Luxe

Description Zehnder ComfoAir 200, left-handed CA200L Zehnder ComfoAir 200, right-handed CA200R Zehnder ComfoAir 200 Luxe with pre-heater, left-handed CA200LLUXEPH Zehnder ComfoAir 200 Luxe with pre-heater, right-handed CA200RLUXEPH   The Zehnder ComfoAir 200 can be ceiling or wall mounted and suitable for properties up to 120m2 Available in two versions ComfoAir 200 – controlled by optional 3-speed switch ComfoAir 200 Luxe – controlled by optional digital controller or RF controllers Sap Appendix Q listed with (A+) energy rating and is Passive house approved BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems,   Key features- Zehnder ComfoAir 200 Suitable for home sizes up to 120m2 Airflow rate @100Pa - 285m3/h 93% heat recovery efficiency. 100% full and filtered modulating summer bypass. Left- or right-hand configuration BMS capability via RS232 protocol. RFZ wireless connectivity option. Passive house Approved 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact G4 filtration Tool free filter access. SAP Appendix Q listed   Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) ComfoAir 200 controllers Comfo Control Basic The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate Comfo Control Basic LED The Zehnder CCL is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system Maintenance notification ComfoAir 200 Luxe controllers   Comfo Switch C67 Led controller that allows you to adjust speed and view service alerts   Comfo Control RFZ 3 Speed wireless controller (will only operate with the use of the RF-PCB)   Comfo Control RFZT wireless timer controller of 10min to 90min (will only operate with the use of the RF-PCB) RF-PCB The Zehnder RF-PCB enables the CCRFZ (655 000 755) controller to be used with the ventilation system without the need for the Comfo Sense C67. Room Sensors 12V 0-10V RH sensor The Zehnder 12V 0-10V remote humidity sensor enables a signal to be sent to the ventilation system to control the corresponding flow rate. 12V 0-10V CO2 sensor The Zehnder 12V 0-10V remote CO2 sensor and combined three position switch is designed to enable the user to manually select the desired ventilation systems flow rate based on the visual air quality indicator, or automatically adjust the unit relevant to the CO2 level. Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits

GBP 2131.07
1

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting

Zehnder ComfoAir 155 CM for ceiling mounting Product Part Number CA155CM-GB Description Zehnder ComfoAir 155 CM - CA155CM-GB The Zehnder ComfoAir 155 CM is a ceiling mounted MVHR unit suitable for properties up to 150m2 and manufactured in Germany to a high standard This unit has a (A+) energy rating BPC Ventilation are the largest independent MVHR specialists and supply lifetime technical support on our top-quality systems Key features Suitable for home sizes up to 150m2 Airflow rate @100Pa - 285m3/h 93% heat recovery efficiency. 100% full and filtered modulating summer bypass. Internal Humidity sensor Left- or right-hand configuration through software 100% variable AUX speed for use as a way mode, medium speed or purge boost. BMS compatibility option. Volt free contact Adaptive comfort technology. G3 filtration Tool free filter access. SAP Appendix Q listed Controllability The Zehnder ComfoAir units have an optional selection of boost switches and room sensors for demand controller ventilation Inputs Volt free contact boost capability. 240v switched live capability Wall controllers (optional) There are 3 options of additional wall controller Zehnder ZGRC1 The Zehnder ZGRC1 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate and provide system notifications Key Benefits 2 separate ventilation flow rate options to select in 1 controller Summer bypass indicator Frost protection indicator Service and Maintenance alert Automatic switching back to low speed after a pre-set time period to avoid the unit accidentally being left in its high speed  Zehnder ZGS1 The Zehnder ZGS1 is a three-position switch designed to enable the user to manually select the desired ventilation systems flow rate  Zehnder ZGS2 The Zehnder ZGS2 is a two-position switch designed to enable the user to manually select the desired ventilation systems flow rate   Room Sensors Zehnder AQR The Zehnder AQR remote air quality sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set activation level covering a range of pollutants such as hydrogen, CO, methane, ethanol and isobutane Adjustable overrun timer between 2-40 minutes Zehnder PIRR The Zehnder PIRR remote passive infra-red movement sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Senses movement up to 7 m away Adjustable overrun timer between 2-40 minutes Zehnder HHR The Zehnder HHR remote humidity sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set humidity activation between 30-90% relative humidity Adjustable overrun timer between 2-40 minutes Zehnder THR The Zehnder THR remote temperature sensor enables a signal to be sent to the ventilation system to automatically place the unit into a higher flow rate. Key Benefits Set temperature activation between 5-35°C Fixed 2-minute overrun timer BMS Control BMS integration is possible Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. Installation  bracket is included with unit Construction The Zehnder range are manufactured of EPP with plastic outer covers Motors Quality EC motors Filtration 2 x G4 filters are fitted to the unit that are easy to replace Optional G4 to air supply Summer By-Pass

GBP 1434.06
1

Panasonic Smart Wall Mounted Fan Coil

Panasonic Smart Wall Mounted Fan Coil

Panasonic Smart Wall Mounted Fan Coil Product Part Number Panasonic 200 Smart wall mounted fan coils - PAW-AAIR-200-2 Panasonic 700 Smart wall mounted fan coils - PAW-AAIR-700-2 Panasonic 900 Smart wall mounted fan coils - PAW-AAIR-900-2 Description Bring year-round heating and cooling to any room with the Panasonic Smart fan coil. The Smart fan coils look like a stylish wall radiator but can supply superior heating and cooling from a low temperature heat pump and be controlled by a built-in touch screen thermostat. Specially designed for use with our range of Panasonic heating and cooling air to water heat pumps to provide high efficiency climate control. With automatic control of passive heating or the use of up to 4 fan speeds a quiet but effective enables high airflows to be achieved with low pressure loss and low noise levels. The slimline design of less than 13cm and the choice of 3 models makes the smart fan coils perfectly designed to adapt to any installation including residential applications, hotels, shops, restaurants, and offices.   Dimensions Model Height Width Depth Weight 200-2 735mm 579mm 129mm 17kg 700-2 935mm 579mm 129mm 20kg 900-2 1135mm 579mm 129mm 23kg

GBP 886.98
1

Vent Axia Kinetic 200ZH Heat Recovery Unit

Vent Axia Kinetic 200ZH Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZH Horizontal Heat Recovery Unit Product Part Number Vent Axia Kinetic 200ZH - 449540 Key Features Vent Axia Horizontal Heat recovery unit Suitable for houses up to 140 m2 Up to 81% heat recovery Mechanical summer by-pass Internal humidity sensor 5 Year warranty Complete with digital controller Multiple control options Frost protection 100% programmable and adjustable supply and extract rates Night time set back Dimensions (HxLxW): 200 x 570 x 895 (mm) Filtration 2 x G3 with optional F5 Controllability The Lo-Carbon Sentinel Kinetic Horizontal models have three fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range. Boost can be achieved with almost any type of sensor or switch including momentary. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction Fully insulated construction of galvanised steel. Motors The unit has 2 x low energy, high efficiency EC/DC motors

GBP 2534.40
1

Vortice HR 350 Avel Heat Recovery Unit

Vortice HR 350 Avel Heat Recovery Unit

Vortice HR 350 Avel Heat Recovery Unit The Vortice HR 350 Avel has been developed with the latest technology with contoured internal mouldings that lower air resistance providing a quieter and more efficient heat recovery system designed to provide essential ventilation and to save you money through its intelligent heat recovery facility, this system provides a cost-effective and environmentally friendly option for residential applications. MAIN FEATURES: Digital controller panel Supply and extract air ventilation with heat recovery EPP construction Boost operation with timer Automatic frost protection On demand control via room or duct sensor options Complies with the NHBC criteria and ErP 2016 standards SAP Appendix Q eligible. Meets building regulations Optional Co2 or Humidity sensors Optional electric post heater Filtration The Fresh air is 100% fully filtered with two quality filters even in bypass mode which helps to maintain good indoor air quality within the home Controllability Supplied with a wired digital controller panel with a range of humidity, Co2 and timer sensors available at extra cost Features Suitable for houses or apartments up to 200 m2. / extract from a Kitchen and 5 wet room  Construction The enclosure is constructed with the latest EPP with contoured internal mouldings to IPX2 ratings with a removable hinged door for easy maintenance Motors The supply and extract air is provided with 2 EC (brushless) motors with shaft turning in ball bearings, each coupled to a backward curved centrifugal impeller; 3 speeds, selectable independently at the moment of installation.

GBP 3551.03
1

Zehnder Caladair Combibox CBH Modular Box Fan

Zehnder Caladair Combibox CBH Modular Box Fan

High quality bespoke units manufactured in Spain to order (please contact office for delivery and accurate Pricing) Zehnder Caladair Combibox CBH Modular Box Fan Caladair Combibox is a low consumption modular air handling unit that can be connected to any one or more Combibox Filters, Electric heaters, LPHW, LPCW and DX battery’s allowing for a comprehensive modular air handling unit or simply used on there own These units are suitable for air extraction or supply, featuring a direct drive forward motor, very low consumption, EC motor. Key features Low consumption Equipped with branch connections Connections have double lip seals ensuring network sealing Aluminium profile with reinforced polyamide corners RAL 7035 double skin metal sheets High density 25mm MO mineral wool insulation Swappable and removable panels Local padlockable switch and potentiometer mounted in the standard version Flow rates 200 to 12000 m3/h Isolation switch installed on unit High quality Construction. Models The Combibox CBH comes in four different modulation flows and 6 different sizes. The range includes different versions of flow modulation including constant speed, constant pressure, constant air flow rate and variable flow. Models include the Combibox CBH, Combibox CBH Diva, Combibox CBH Lobby and Combibox CHB Mac. Sizes available: Combibox CBH 4 Combibox CBH 5 Combibox CBH 6 Combibox CBH 7 Combibox CBH 8 Combibox CBH 9 Controllability Control system communicates using MODBUS (RS 485) Diva model – pressure transmitter Co2 sensor Lobby model – constant pressure Mac2 – constant air flow, built in the unit Motors The Combibox fan unit features an EC motor, this motor is direct drive forward motor and is very low consumption.

GBP 5251.20
1

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit Product Part Number Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit - 407162 Description Vent Axia Sentinel Kinetic 200ZPH is a horizontal ceiling mounted whole house heat recovery system with up to 86% heat exchange efficiency. Specifically designed for new build constructions with a high level of insulation. The Lo-Carbon Sentinel Kinetic Horizontal 200ZPH meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation: System 4 - Continuous mechanical supply and extract with heat recovery. Vent Axia 200ZPH is suitable for house sizes of up to 140m2 Filtration This unit requires 2 x G3 filter Controllability The Lo-Carbon Sentinel Kinetic Horizontal models have two fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range. Boost can be achieved with almost any type of sensor or switch including momentary. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction Constructed of galvanised steel and is fully insulated Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation The Sentinel Kinetic Horizontal models designed to be horizontally mounted under a slab, with access for servicing and maintenance from below. When mounted in an unheated area ducting must be insulated. 200 ZPH models are 200mm deep, including condensate and mounting bracket. The Condensate drain is through the 'atmosphere' end of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation. Electrical and control connections are also made on the outside of the unit. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1915.20
1

Nuaire MRXBOXAB Hybrid Cooling Kit

Nuaire MRXBOXAB Hybrid Cooling Kit

Nuaire MRXBOXAB-HYBRID COOLING KIT   Description Nuaire’s MRXBOX Hybrid Cooling System combines year-round high levels of indoor air quality with the added benefit of summer cooling to mitigate overheating. This added cooling significantly lowers the temperature of fresh air supplied into the dwelling, helping maintain comfortable internal temperature levels even in city centre apartments on the hottest days of summer. The MRXBOX Hybrid Cooling System consists of the MRXBOXAB-ECO5B-AE acoustic unit and the MR-ECO-COOL-V Cooling module and ECO5-AE-1Z-STND Floor stand The Nuaire MRXBOXAB-ECO5B provides a maximum flow rate of 450m3/hr and is recommend running at a min flow rate of 1 ACH when cooling is required Controllability to the comfort cooler is via a room thermostatic control and the MVHR unit is provided by an internal humidity sensors and optional room sensors or switches (no digital controller is available for this model) BPC Ventilation are the largest independent MVHR specialists and supply this unit with up to a 5-year parts warranty* and lifetime technical support on our top-quality systems Integral Humidity Sensor The Nuaire unit has a internal humidity sensors that can provide a superior demand-controlled ventilation solution for your property When the unit senses that the humidity exceeds the set point the unit will boost to that set by the commissioned boost speed. The humidity can be set on the front of the unit We also advise an optional boost switch should be used local to the wet rooms Filtration 2 x G3 filters are fitted to the unit that are easy and inexpensive to replace (The filters are provided with plastic covers that should be removed before starting unit for first time)   CONTROL OPTIONS The Cooling unit is controlled via a wall-mounted thermostatic control (CM-THERM-CONTROL) that senses indoor temperature and activates the cooling module when necessary. The thermostat is pre-set at 23°C but can be adjusted. If the property reaches this temperature, the cooling module will automatically activate to lower the temperature of the fresh air entering your home. The MVHR will also raise to a higher speed to increase fresh air supply and stale air extraction at the same time. Once the temperature in your home drops below this temperature, the cooling module will automatically turn off and the MVHR will return to its original speed. The Nuaire MRXBOX MVHR units are controlled by one of the following: 4 x adjustable switches on the front of the unit Manual control Via optional 3 speed manual switch On-demand ventilation through built-in humidity sensors Additional external sensors achieving on-demand ventilation Switched live signal from light/remote switches Heat Exchanger This unit has a high-quality PVC counterflow heat exchanger with up to a 90% thermal efficiency protected with high-capacity filters on each side The heat exchanger is easy to remove for maintenance and any accumulated condensation is easily dispersed via a drain at the bottom of the unit Frost Protection In the event of the intake air temperature at the unit dropping below the predetermined set point (-5°C as standard) the supply fan will reduce to minimum speed, once the temperature rises above the set point the fan will return to its commissioned speed. Frost protection will only activate after ten days of continuous run time. Summer By-Pass The Nuaire AB units have a 100% summer by-Pass If the indoor temperature Intake exceeds 25°C and the outdoor temperature is within comfort zones the summer by-pass is opened automatically to help provide a comfortable indoor temperature Orientation The Nuaire units can be right or left-handed and correct orientation should be checked before purchase Construction Manufactured of powder coated galvanised steel outer cover for durability and an inside EPP lining for quietness and efficiency Ducting All MVHR units using a comfort cooler require all ductwork insulated and capable of achieving a minimum of 1 ACH (air changes per hour) to all areas  

GBP 7567.66
1