4 results (0,13451 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Prochem C503 Proshine 2 x 5 Litre

Prochem C503 Proshine 2 x 5 Litre

Prochem C503 Proshine is a high solids metallised 'dry-bright' floor finish formulated to give a long lasting deep gloss shine on vinyl, linoleum, thermo-plastic, rubber, sealed wood, cork, concrete, asphalt, terrazzo and other non-porous smooth floors coverings. High solids metallised emulsion floor polish. - High gloss, self-shining finish for a long lasting slip resistant shine. - Two or three thin coats recommended for best results. - White emulsion with acrylic odour. - Coverage approx. 250m2 per 5 litres per coat. Directions - For professional and industrial use only. - Proshine is ready-to-use. Do not dilute with water. - Do not shake container. - Ensure floor is clean, dry and free from all residues. Semi-porous, concrete and impoverished floors should be sealed with a base coat of Proseal. - Spread Proshine evenly using a slightly damp mop or polish applicator. Apply 2 or 3 very thin coats, allowing 30 to 60 minutes between coats. Do not over apply. - Coverage is approximately 250 m2 per 5L per coat. - Allow final coat to dry completely before re-use. Do not buff floor at this stage. - Periodically the floor gloss can be maintained by spray buffing with Protreat. - Keep from freezing. pH Values - pH Concentrate: 9.0 - pH Diluted: Not applicable

GBP 0.00
1

Prochem Citrus Gel 1 Litre 1 Litre

Prochem Citrus Gel 1 Litre 1 Litre

Prochem Citrus Gel is a citrus based liquid gel spot remover for use on carpets, fabrics and most surfaces. Citrus Gel will safely and effectively remove oils, grease, tar and gum and is gelled to help prevent damage to latex carpet backings. Features: - Grease, gum and oil for carpet, fabrics and most surfaces. - Citrus solvent and detergent based liquid gel. - Formulated to work on the fibre surface avoiding damage to the bitumen and latex backings. - Ready-to-use - White gel with citrus fragrance. Directions - For professional and industrial use only. - SHAKE BEFORE USE. Citrus Gel is ready-to-use from the nozzle applicator. - Always pre-test surface to be treated in an inconspicuous area before proceeding. Bitumen backed carpet tiles and some latex backings and adhesives may not be stable to solvents. - Scrape up any excess staining matter then apply Citrus Gel to spot and allow 2 to 5 minutes contact time. - DO NOT OVER APPLY. DO NOT USE OVER LARGE AREA WITHOUT PRE-TESTING STABILITY. - Scrape dissolved residue or blot with white towel or tissue. DO NOT RUB. - Repeat if necessary, working from outside to centre of large spots. - Blot small spots or extract large areas with water. Brush carpet or fabric to align fibres. pH Values - pH: 5.0

GBP 24.99
1

Prochem Powdered Defoamer 4kg 4kg

Prochem Powdered Defoamer 4kg 4kg

Prochem Powdered Defoamer is an economical, highly concentrated agent designed to neutralize excessive foaming in extraction cleaning equipment. It can be added directly to the waste tank or applied to the carpet. This moist, white powder contains silicone anti-foam and inert ingredients. Directions for use: - Dissolve 1 x 15ml scoop of powdered defoamer in a small amount of cold water and feed directly into vacuum hose with motor running. - When adding to machines with no hose, place directly into waste recovery tank. - If foaming is excessive, increase amount of powdered defoamer or sprinkle directly onto the carpet prior to extraction cleaning. N.B. Do not add this product directly to the cleaning solution.

GBP 0.00
1

Prochem Power Burst 4kg 4kg - BMP238-4

Prochem Power Burst 4kg 4kg - BMP238-4

Prochem Power Burstis a powerful, professional, detergent pre-spray for high performance pre-cleaning of heavily soiled commercial carpets. It is ideal for use on greasy carpets with a high build up of oil, food and fats, and those with heavy traffic; it is particularly recommended for use in restaurants, leaving a fresh, floral fragrance. Directions for use: - Pre-test on an inconspicuous area for colour-fastness before use. - Dilute with hot water (maximum 65c) at a rate of 1:66, or 1:22 in an injection sprayer. - Apply using a sprayer and brush with a pile brush, allowing to react for 5-10 minutes before extraction - do not allow to dry. - Extract with prochem fibre and fabric rinse. N.B. Prochem Power Burst is irritating to skin and can cause serious damage to eyes - always wear gloves and safety glasses.

GBP 79.99
1