Noctua NA-FH1 -tuuletinhubi, musta

The na-fh1 is a high-quality, smartly-protected 8 channel pwm fan hub that allows up to eight pwm fans to be run and controlled simultaneously via a single pwm motherboard fan header or stand-alone controllers such as the optional na-fc1. Non-pwm fans can be controlled by adjusting the input voltage. Supporting both 12v and 5v fans with 4-pin pwm and 3-pin connectors, the na-fh1 is highly flexible and suitable both for pc environments and other 12v- or 5v-based applications. It can be powered either via its s-ata input (for 12v fans, up to 54w) or 4-pin pwm input (for 5v and 12v fans, up to 24w), both of which are protected against overcurrent with a self-resetting fuse for maximum safety even in case of short-circuits on the connected devices or cables. The two ports can also be used concurrently with the device, automatically taking power via s-ata and exchanging rpm and pwm signals via the 4-pin interface. Status leds allow for easy monitoring and thanks to its magnetic fixture, installing the na-fh1 inside a pc case or on any other steel surface is a breeze. Topped off with ce, ukca and ul certifications, full compliance with all applicable safety standards as well as noctua’s 6-year manufacturer’s warranty, the na-fh1 is a safe, dependable premium choice for powering and controlling up to eight fans.caution: do not place directly on hard disk drives, keep at least 5cm distance. When powering via the 4-pin input from a pc motherboard, please check your motherboard manual for the maximum current of the fan header and make sure not to exceed it.up to 54w via s-ata and 24w via 4-pinwhen powered via it’s s-ata interface (for 12v fans only), the na-fh1 can run fans with a combined power draw of up to 54w. When using the 4-pin pwm input only (for 5v or 12v fans), the maximum power draw can go as high as 24w.controlling high-power fans safelyif both its s-ata and 4-pin input ports are connected, the na-fh1 will automatically draw power via s-ata and use the 4-pin port for pwm control and rpm monitoring only. This way, it is possible to control fans with high power consumption safely without risking damage to the motherboard.rpm and status monitoringthe na-fh1 transmits the rpm speed signal of the fan connected to the first port to the motherboard for speed monitoring. For additional watchdog functionality, all ports feature status leds that light up if an rpm signal is being received and go off if the fan stops or fails.compatible with 4-pin pwm and 3-pin fanswhile only 4-pin pwm fans can be controlled via pwm, the na-fh1’s keyed output connectors are also compatible with 3-pin fans, so it can also be used to run multiple 3-pin fans from a single power source and to adjust their speed simultaneously by reducing the input voltage.suitable for 12v and 5v fanssupporting both 12v and 5v (4-pin power input only) operation, the na-fh1 not only works great with 12v pc fans, but is also an elegant solution for running multiple noctua 5v fans, many of which include usb adaptor cables that can be used to connect the na-fh1 to mobile phone power supplies or power banks.ideal combination with optional na-fc1 fan controllerthe na-fh1 is ideal for controlling multiple pwm fans using the optional na-fc1 controller. Thanks to a reverse-power design on the 4-pin input of the na-fh1, the na-fc1 can control the connected fans even if the hub is powered via its s-ata interface only and if there is no other connection or input on the 4-pin interface.easy installation with magnetsthe na-fh1 features four strong neodymium magnets on the rear side, which allows it to simply snap into place on any magnetic surface such as inside steel pc cases. On non-magnetic surfaces such as aluminum pc cases, the flat rear side of the device makes it possible to easily fix it with double-sided tape or velcro tape.30cm input cable includedthe na-fh1 is shipped with a 30cm na-ec1 input cable to connect it to motherboard pwm fan headers. For applications that require further extending the input cable or extending the output cables to the fans, noctua offers the na-sec1 (30cm) and na-sec3 (60cm) cable sets.overcurrent and short-circuit protection with safety fusesespecially when drawing power from a pc power supply via s-ata connectors, short-circuits on the connected cables or devices can cause hazardous situations such as cable fires. For extra safety, the na-fh1 has auto-resetting fuses both on the s-ata and on the 4-pin input so that it can automatically shut down in case of overcurrent or short-circuits on one of the connected devices or cables.safety certificationsunlike many cheap fan hubs, the na-fh1 has been carefully tested for product safety and emc compliance. Carrying ce, ukca and ul certifications and meeting all applicable standards (en 62368-1, en 55035, en 55032, ul-507), it is a safe, quality device through and through.6-year manufacturer’s warrantynoctua products are renowned for their impeccable quality and outstanding longevity. Li

Noctua NA-FC1 PWM-tuuletinsäädin

The na-fc1 is a compact, highly flexible controller for 4-pin pwm fans that can both work on its own for manual speed reduction and also work in tandem with the automatic motherboard fan control. By adjusting the na-fc1’s speed control dial, users can either manually set a pwm duty cycle from 0 to 100% or reduce the pwm duty cycle supplied by pc motherboards in order to have the fans running slower than the automatic motherboard fan control would allow. While the brightness of the orange status led provides visual feedback on the current dial setting, the push button allows the na-fc1 to be switched into “no stop” mode, which prevents the fan from falling below a speed of 300rpm. Thanks to the supplied 3-way split cable and power supply adaptor, up to 3 fans can be controlled simultaneously.pwm based controlwhile most fan controllers are voltage based, the na-fc1 uses the more sophisticated pulse width modulation (pwm) technique that allows for more efficient control and lower minimum speeds, regardless of the fan’s starting voltage.manual control modeif the na-fc1 doesn’t receive an input pwm signal from the motherboard, it works as a simple and efficient manual controller that allows the duty cycle to be set from 0 to 100%. This makes it ideal for manually slowing down high-speed pwm fans such as noctua’s industrialppc series in order to achieve consistently quiet operation.customising motherboard fan controlmany motherboards provide insufficient options to customise automatic fan control or simply don’t go below certain duty cycles and speed levels. Using the na-fc1, you can lower the motherboard’s pwm control curve in order to achieve truly silent operation, even with high-speed pwm fans such as noctua’s industrialppc series.“no stop” mode“if the small push button is pressed and the green status led is on, the na-fc1 operates in “no stop” mode, which means that it will not allow the fan to fall below 300rpm, regardless of the speed setting and the input pwm duty cycle from the motherboard, thus avoiding bios fan errors.3-way splitter cablethe supplied 3-way splitter cable allows the connection of up to three 4-pin pwm fans in order to control them simultaneously. Even more fans can be controlled at once when using additional na-yc1 splitter cables that are supplied with many noctua fans and available as an optional accessory kit (na-syc1).power supply adaptoras powering multiple higher wattage fans from a single motherboard fan header may damage the motherboard, the na-fc1 includes an na-ac4 adaptor that powers the device directly from the power supply unit while simultaneously receiving pwm input from the motherboard and forwarding rpm information. This makes it ideal for controlling multiple high-speed fans such as noctua’s 3000rpm industrialppc models.6-year manufacturer’s warrantynoctua products are renowned for their impeccable quality and outstanding longevity. Like all of them, the na-fc1 fan controller is built to last and comes with a full 6-year manufacturer's warranty.

Noctua NA-HC8 chromax.black jäähdytyssiilin -peitelevy, musta

Les habillages pour ventirads na-hc7 et na-hc8 noctua sont des élé-ments accessoires dédiés aux célèbres ventirads cpu des séries nh-u12a.fabriqués à partir d’un aluminium haute qualité protégé d’un revêtementpar poudre et disponibles en noir (chromax.black), blanc (chromax.white)ou en noir associé à des éléments interchangeables noirs, blancs, rouges,bleus, verts et jaunes (chromax.black.swap), ces habillages permettent auxutilisateurs de coordonner librement leurs ventirads aux thèmes couleurspopulaires tels que le 100 % noir, noir / blanc ou noir / rouge.l’installation étant simple et rapide, changer le look d’un ventirad noctua ne prend que quelques minutes et ne nécessite même pas de le désolidariserdu cpu. Associés aux ventilateurs de la série chromax.black.swap, les habillages na-hc offrent ainsi une palette créative infinie et vous permettent decustomiser à votre goût votre ventirad noctua pour le rendre aussi beau qu’efficace.

DELTACO USB 3.0 hubi, 7xTyp A na, virtalähde, musta

Deltaco usb 3.0 hubi, 7xtyp a na, virtalähde, mustayhteensopivuus: windows vista, 7 ja 8, mac os x 10.7.x ja uudemmat mitat(lxsxk):174x61x24mmpakkaus sisältää: usb-hubi, usb-kaapeli type a ur - type b ur, virtalähde 5v 4a.

Noctua NA-HC2 chromax.black -prosessorijäähdyttimen lisäkansi, musta

The na-hc2 chromax.black heatsink cover is an add-on accessory for noctua’s award-winning nh-u12s, nh-u12s tr4-sp3, nh-u12s se-am4 and nh-u12s dx-3647 cpu coolers. Made from high-quality aluminium with black powder-coating finish, it allows users to give the cooler a sleek stealth look that is right at home in all-black builds and goes nicely with many other popular colour schemes. Thanks to the easy, straightforward installation, changing the looks of your nh-u12s cooler only takes a few minutes and doesn’t even require taking it off the cpu. Combined with the industrialppc or chromax.black.swap edition nf-f12, fans, the na-hc2 chromax.black gives you the option to turn your nh-u12s into an all-black powerhouse that looks just as great as it cools.chromax.black designthe na-hc2 chromax.black editon features a deep black powder-coating finish that gives a unique, sleek stealth look when combined with black industrialppc or chromax.black.swap fans and chromax.black anti-vibration pads. What a match for black motherboards, case interiors and all-black builds!endless options for customisationdo you want to give your entire heatsink a custom colour to take things one step further? While spray-painting heatsinks is difficult and reduces performance, noctua’s powder-coated chromax covers can easily be repainted with custom colours and decorations.match with industrialppc or chromax fans and padsnoctua’s chromax line heatsink covers are a perfect match for the black industrialppc and chromax.black.swap fans, both of which can be colour-customised using chromax anti-vibration pads and cables (available in black, white, red, blue, green and yellow).high-quality powder-coated aluminiumtired of flimsy, thin plastic faceplates? The chromax line heatsink covers are made from sturdy, 1mm-thick aluminium and feature a scratch-resistant powder-coating finish in order to match the build quality of your noctua heatsink.easy installationinstalling noctua’s chromax line heatsink covers is child’s play: put the fixture on top of the cooler, secure it with the steel clip, slide on the cover until the magnets snap into place – done! You don’t even have to remove the cooler from the cpu or take off the fan.6-year manufacturer’s warrantymanufactured to the same strict quality standards as your trusty noctua cpu coolers and fans, the chromax line heatsink covers come with the same 6-year manufacturer’s warranty as all other noctua products.

Noctua NA-HC8 chromax.white jäähdytyssiilin -peitelevy, valkoinen

The na-hc8 chromax.white heatsink cover is an add-on accessory for noctua’s award-winning nh-u12a cpu coolers. Made from high-quality aluminium with white powder-coating finish, it allows users to give the cooler a sleek snow-white look that is right at home in all-white or black and white builds. Thanks to the easy, straightforward installation, changing the looks of your nh-u12a cooler only takes a few minutes and doesn’t even require taking it off the cpu. Combined with the chromax.black.swap edition nf-a12x25 fans, the na-hc8 chromax.black gives you the option to turn your nh-u12a into a black and white powerhouse that looks just as great as it cools.the cover increases the height of the heatsink by 3mm (from 158 to 161mm) and the total width by 3mm (from 125 to 128mm). Please make sure that your case offers sufficient clearance and that the cover doesn’t make contact with any other components such as pcie cards!chromax.white designthe na-hc8 chromax-white edition features a bright white powder-coating finish that gives a sleek, snow-white look and blends nicely with black industrialppc or chromax.black.swap fans outfitted with chromax.white anti-vibration pads. What a match for white motherboards, case interiors and all-white builds!match with industrialppc or chromax fans and padsnoctua’s chromax line heatsink covers are a perfect match for the black industrialppc and chromax.black.swap fans, both of which can be colour-customised using chromax anti-vibration pads and cables (available in black, white, red, blue, green and yellow).high-quality powder-coated aluminiumtired of flimsy, thin plastic faceplates? The chromax line heatsink covers are made from sturdy, 1mm-thick aluminium and feature a scratch-resistant powder-coating finish in order to match the build quality of your noctua heatsink.easy installationinstalling noctua’s chromax line heatsink covers is child’s play: put the fixture on top of the cooler, secure it with the steel clip, slide on the cover until the magnets snap into place – done! You don’t even have to remove the cooler from the cpu or take off the fan.6-year manufacturer’s warrantymanufactured to the same strict quality standards as your trusty noctua cpu coolers and fans, the chromax line heatsink covers come with the same 6-year manufacturer’s warranty as all other noctua products.

Noctua NA-HC2 chromax.white -prosessorijäähdyttimen lisäkansi, valkoinen

The na-hc2 chromax.white heatsink cover is an add-on accessory for noctua’s award-winning nh-u12s, nh-u12s tr4-sp3, nh-u12s se-am4 and nh-u12s dx-3647 cpu coolers. Made from high-quality aluminium with white powder-coating finish, it allows users to give the cooler a sleek snow-white look that is right at home in all-white or black and white builds. Thanks to the easy, straightforward installation, changing the looks of your nh-u12s cooler only takes a few minutes and doesn’t even require taking it off the cpu. Combined with the chromax.black.swap edition nf-f12, fans and their white anti-vibration pads, the na-hc2 chromax.white gives you the option to turn your nh-u12s into a black and white powerhouse that looks just as great as it cools.the cover increases the height of the heatsink by 6mm (from 158 to 164mm) and the total width by 3mm (from 125mm to 128mm). Please make sure that your case offers sufficient clearance and that the cover doesn’t make contact with any other components such as pcie cards!chromax.white designthe na-hc2 chromax.white edition features a bright white powder-coating finish that gives a sleek, snow-white look and blends nicely with black industrialppc or chromax.black.swap fans outfitted with chromax.white anti-vibration pads. What a match for white motherboards, case interiors and all-white builds!endless options for customisationdo you want to give your entire heatsink a custom colour to take things one step further? While spray-painting heatsinks is difficult and reduces performance, noctua’s powder-coated chromax covers can easily be repainted with custom colours and decorations.match with industrialppc or chromax fans and padsnoctua’s chromax line heatsink covers are a perfect match for the black industrialppc and chromax.black.swap fans, both of which can be colour-customised using chromax anti-vibration pads and cables (available in black, white, red, blue, green and yellow).high-quality powder-coated aluminiumtired of flimsy, thin plastic faceplates? The chromax line heatsink covers are made from sturdy, 1mm-thick aluminium and feature a scratch-resistant powder-coating finish in order to match the build quality of your noctua heatsink.easy installationinstalling noctua’s chromax line heatsink covers is child’s play: put the fixture on top of the cooler, secure it with the steel clip, slide on the cover until the magnets snap into place – done! You don’t even have to remove the cooler from the cpu or take off the fan.6-year manufacturer’s warrantymanufactured to the same strict quality standards as your trusty noctua cpu coolers and fans, the chromax line heatsink covers come with the same 6-year manufacturer’s warranty as all other noctua products.

Noctua NA-HC7 chromax.black.swap jäähdytyssiilin -peitelevy, Musta

The na-hc7 chromax.black.swap heatsink cover is an add-on accessory for noctua’s award-winning nh-u12a cpu coolers. Made from high-quality aluminium with black powder-coating finish and including swappable inlays in black, white, red, blue, green and yellow, it allows users to colour-customise the cooler in order to coordinate it with popular build colour schemes such as all black, black and white or black and red. Thanks to the easy, straightforward installation, changing the looks of your nh-u12a cooler only takes a few minutes and doesn’t even require taking it off the cpu. Combined with the chromax.black.swap edition nf-a12x25 fan, the na-hc7 gives you endless possibilities to design your very own, individual nh-u12a that looks just as great as it cools!the cover increases the height of the heatsink by 3mm (from 158 to 161mm) and the total width by 3mm (from 125 to 128mm). Please make sure that your case offers sufficient clearance and that the cover doesn’t make contact with any other components such as pcie cards!chromax.black.swap design with swappable colour inlaysthe na-hc7 chromax.black.swap comes with swappable inlays in black, white, red, blue, green and yellow that allow colour-coordinating the heatsink with most popular build colour schemes. Whether you’re designing your dream machine for the years to come or switch parts on a monthly basis, matching colours has never been so easy!endless options for customisationdo you want to give your entire heatsink a custom colour to take things one step further? While spray-painting heatsinks is difficult and reduces performance, noctua’s powder-coated chromax covers can easily be repainted with custom colours and decorations.match with industrialppc or chromax fans and padsnoctua’s chromax line heatsink covers are a perfect match for the black industrialppc and chromax.black.swap fans, both of which can be colour-customised using chromax anti-vibration pads and cables (available in black, white, red, blue, green and yellow).high-quality powder-coated aluminiumtired of flimsy, thin plastic faceplates? The chromax line heatsink covers are made from sturdy, 1mm-thick aluminium and feature a scratch-resistant powder-coating finish in order to match the build quality of your noctua heatsink.easy installationinstalling noctua’s chromax line heatsink covers is child’s play: put the fixture on top of the cooler, secure it with the steel clip, slide on the cover until the magnets snap into place – done! You don’t even have to remove the cooler from the cpu or take off the fan.6-year manufacturer’s warrantymanufactured to the same strict quality standards as your trusty noctua cpu coolers and fans, the chromax line heatsink covers come with the same 6-year manufacturer’s warranty as all other noctua products.

Noctua NA-HC4 chromax.black prosessorijäähdyttimen -lisäkansi, 2kpl, musta

The na-hc4 chromax .black cooler cover set is an accessory for noctua's award -winning nh-d15 , nh-d15s and nh-d15 se-am4 cpu coolers . Constructed from high-quality black powder-coated aluminum, the shrouds give the cooler an elegant, stealth look that perfectly complements all-black systems, as well as many other popular color schemes. Thanks to the easy installation, it only takes a few minutes to change the look of an nh-d15(s) and the cooler does not even have to be removed from the cpu. Together with the chromax.black.swap edition of the nf-a15, fans, the na-hc4 chromax.black covers offer you the opportunity to transform your nh-d15(s) into a black powerhouse that combines excellent cooling performance with spectacular design.chromax.black designthe na-hc4 chromax.black cover is powder-coated in jet black. In combination with the black industrialppc or chromax.black.swap fans and the chromax.black anti-vibration pads, an elegant stealth look can be created that goes perfectly with black mainboards, case interiors and systems that are completely black.countless possibilities for customizationwould you like to give your whole radiator a new color? Painting a heatsink directly is difficult and reduces cooling performance, but noctua's powder-coated chromax covers can be easily customized with other colors and motifs.ideal in combination with industrialppc or chromax fans and padsnoctua's chromax covers are a perfect match for the black industrialppc and chromax.black.swap fans, which can be accentuated with the colored anti-vibration pads and cables of the chromax range in red, green, blue, yellow, white or black.high-quality, powder-coated aluminumtired of rickety plastic bezels? The cooler cover of the chromax line is made of robust, 1mm thick aluminum and scratch-resistant powder-coated - so they are in no way inferior to the processing quality of your noctua cooler.easy constructioninstalling the chromax covers is child's play: place the bracket on the cooler, secure it with the steel clamp and slide the cover over the cooler until the magnets click - done! You don't even need to remove the cooler from the cpu or the fan from the cooler.6 year manufacturer guaranteethe chromax line of cooler shrouds are manufactured to the same strict quality criteria as noctua's cpu coolers and fans. Like all noctua products, they come with a 6-year manufacturer's guarantee.

Noctua NA-HC4 chromax.white prosessorijäähdyttimen -lisäkansi, 2kpl, valkoinen

The na-hc4 chromax.white heatsink covers are an add-on accessory for noctua’s award-winning nh-d15, nh-d15s and nh-d15 se-am4 cpu coolers. Made from high-quality aluminium with white powder-coating finish, they allow users to give the cooler a sleek snow-white look that is right at home in all-white or black and white builds. Thanks to the easy, straightforward installation, changing the looks of your nh-d15(s) cooler only takes a few minutes and doesn’t even require taking it off the cpu. Combined with chromax.black.swap edition nf-a15, fans and their white anti-vibration pads, the na-hc4 chromax.white covers give you the option to turn your nh-d15(s) into a black and white powerhouse that looks just as great as it cools.the covers increase the height of the heatsink by 5mm (from 160 to 165mm) and the width by 3mm (from 150mm to 153mm). Please make sure that your case offers sufficient clearance and that the covers don’t make contact with any other components such as pcie cards!chromax.white designthe na-hc4 chromax.white edition features a bright white powder-coating finish that gives a sleek, snow-white look and blends nicely with black industrialppc or chromax.black.swap fans outfitted with chromax.white anti-vibration pads. What a match for white motherboards, case interiors and all-white builds!endless options for customisationdo you want to give your entire heatsink a custom colour to take things one step further? While spray-painting heatsinks is difficult and reduces performance, noctua’s powder-coated chromax covers can easily be repainted with custom colours and decorations.match with industrialppc or chromax fans and padsnoctua’s chromax line heatsink covers are a perfect match for the black industrialppc and chromax.black.swap fans, both of which can be colour-customised using chromax anti-vibration pads and cables (available in black, white, red, blue, green and yellow).high-quality powder-coated aluminiumtired of flimsy, thin plastic faceplates? The chromax line heatsink covers are made from sturdy, 1mm-thick aluminium and feature a scratch-resistant powder-coating finish in order to match the build quality of your noctua heatsink.easy installationinstalling noctua’s chromax line heatsink covers is child’s play: put the fixture on top of the cooler, secure it with the steel clip, slide on the cover until the magnets snap into place – done! You don’t even have to remove the cooler from the cpu or take off the fan.6-year manufacturer’s warrantymanufactured to the same strict quality standards as your trusty noctua cpu coolers and fans, the chromax line heatsink covers come with the same 6-year manufacturer’s warranty as all other noctua products.

Noctua NA-HC3 chromax.black.swap -prosessorijäähdyttimen lisäkansi, 2 kpl, musta

The na-hc3 chromax.black.swap heatsink covers are an add-on accessory for noctua’s award-winning nh-d15, nh-d15s and nh-d15 se-am4 cpu coolers. Made from high-quality aluminium with black powder-coating finish and including swappable inlays in black, white, red, blue, green and yellow, they allow users to colour-customise the cooler in order to coordinate it with popular build colour schemes such as all black, black and white or black and red. Thanks to the easy, straightforward installation, changing the looks of your nh-d15(s) cooler only takes a few minutes and doesn’t even require taking it off the cpu. Combined with chromax.black.swap edition nf-a15, fans, the two na-hc3 chromax.black.swap covers give you endless possibilities to design your very own, individual nh-d15(s) that looks just as great as it cools!chromax.black.swap design with swappable colour inlaysthe na-hc3 chromax.black.swap comes with swappable inlays in black, white, red, blue, green and yellow that allow colour-coordinating the heatsink with most popular build colour schemes. Whether you’re designing your dream machine for the years to come or switch parts on a monthly basis, matching colours has never been so easy!create your own inlays in custom coloursdo you want to use a custom colour for your new project? Creating custom-coloured inlays for the chromax.black.swap covers couldn’t be easier: either spray-coat one of the supplied ones or cut a 150x36mm piece of paper, cardboard or plastic (max. Thickness 0.5mm), put it inside the cover and you’re ready to go!endless options for customisationdo you want to give your entire heatsink a custom colour to take things one step further? While spray-painting heatsinks is difficult and reduces performance, noctua’s powder-coated chromax covers can easily be repainted with custom colours and decorations.match with industrialppc or chromax fans and padsnoctua’s chromax line heatsink covers are a perfect match for the black industrialppc and chromax.black.swap fans, both of which can be colour-customised using chromax anti-vibration pads and cables (available in black, white, red, blue, green and yellow).high-quality powder-coated aluminiumtired of flimsy, thin plastic faceplates? The chromax line heatsink covers are made from sturdy, 1mm-thick aluminium and feature a scratch-resistant powder-coating finish in order to match the build quality of your noctua heatsink.easy installationinstalling noctua’s chromax line heatsink covers is child’s play: put the fixture on top of the cooler, secure it with the steel clip, slide on the cover until the magnets snap into place – done! You don’t even have to remove the cooler from the cpu or take off the fan.6-year manufacturer’s warrantymanufactured to the same strict quality standards as your trusty noctua cpu coolers and fans, the chromax line heatsink covers come with the same 6-year manufacturer’s warranty as all other noctua products.

2RCA UR-2RCA NA JATKOJOHTO

- gold-plated extension cable- pe insulator- gold-plated

Deltaco USB 3.0 hubi, 4x A na, alumiini, musta

Deltaco usb 3.0 hubi, 4x a naaras, alumiini, 0,3m, mustakäytännöllisen muotoinen alumiininen usb-hubi. Varustettu led-merkkivalolla, joka ilmoittaa onko hubi liitetty laitteeseen. Portti virransyötölle tarvittaessa. - 4x usb a naaras- plug and play- kaapelipituus 30cm- yhteensopivuus: windows xp, vista, 7, 8 ja mac os x 10.0 tai uudempi. Mitat (lxsxk): 112x35x16mm

Star Wars The Black Series 6 Inch Jod Na Nawood

Star wars the black series includes 6 inch action figures, vehicles, and roleplay items from the 40-plus-year legacy of the star wars galaxy. With exquisite features and decoration, this series embodies the quality and realism that star wars devotees love. May the force be with you! (additional products each sold separately. Subject to availability.) star wars products are produced by hasbro under license from lucasfilm ltd. Hasbro and all related terms are trademarks of hasbro.

DELTACO USB-C VGA ja USB Typ A adaptereihin, USB-C na, 60W, valkoinen

Noctua NH-FK1 redux, 120mm lisätuuletinsarja NH-U12S redux -prosessorijäähdyttimeen

The na-fk1 is a second fan kit for the nh-u12s redux cpu cooler. Upgrading it to a push/pull-style dual-fan setup makes it possible to further improve cooling performance or to reduce noise levels by having two fans running at lower speeds. The kit includes a second nf-p12 redux-1700 pwm fan, anti-vibration pads, fan mounting clips, a 4-pin pwm y-cable as well as two low-noise adaptors – everything you need to boost the efficiency of your nh-u12s redux!enhanced cooling performanceadding a second nf-p12 redux-1700 pwm fan to the nh-u12s redux makes it possible to further improve cooling performance by around 1-3°c, depending on the application. As a rule of thumb, the gains are bigger the higher the heat load, so the na-fk1 is particularly attractive for higher-end cpus, extensive turbo use or overclocking.lower noise levels and acoustic fine-tuningthe na-fk1 can not only be used to enhance cooling performance, but also to lower noise levels: by letting both fans run at reduced speeds, either via automatic pwm control using the supplied y-cable or via the included low-noise adaptors, the nh-u12s redux can operate more quietly while maintaining the same level of performance.nf-p12 redux-1700 pwmthe nf-p12 redux-1700 pwm fan included with the na-fk1 is the same high-quality unit that comes pre-installed on the nh-u12s redux cpu cooler, so it’s a perfect match for a push/pull-style dual-fan setup. Supporting pwm for automatic speed control, it can run near silent most of the time and provide massive performance when necessary.

Noctua NF-F12, PWM, chromax.black.swap, 120mm -kotelotuuletin

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-f12 is one of noctua’s most renowned and popular 120mm fans. Its outstanding static pressure performance and the focusedflow™ frame make it ideal for use on heatsinks and radiators. The chromax.black.swap edition combines the nf-f12’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium-grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-f12 pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-f12 designhaving received more than 150 awards and recommendations from the international press, noctua's nf-f12 has become a proven premium choice for 120mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-f12 pwm chromax.black.swap comes with 4 black, white, red, blue, green and yellow na-avp1 anti-vibration pads respectively. By combining the various colours with black or leaving off the pads on one side, the fan can be coordinated with most popular build colour schemes out of the box. Additional na-savp1 sets for outfitting both sides in one colour can be purchased separately.heptaperf™ impellercustom designed for the new focused flow™ frame and to work in tandem with the eleven stator guide vanes, the nf-f12's seven blade heptaperf™ impeller has been carefully optimised to achieve a perfect balance between power and quietness.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.focused flow™ framedesigned for pressure demanding applications such as heatsinks and radiators, the focused flow™ frame features eleven stator guide vanes that straighten, channel and focus the airflow, which allows the nf-f12 to rival the performance of conventional fans running at much faster speeds.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.varying angular distance and vortex control notchesthe nf-f12's stator guide vanes are set out in varying angular distance and feature vortex-control notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsuppor

Noctua NF-A14 PWM chromax.black.swap, 140mm -kotelotuuletin, musta

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-a14 is one of noctua’s most renowned and popular 140mm fans. Its square frame makes it ideal for use on water cooling radiators or as a case fan. The chromax.black.swap edition combines the nf-a14’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium-grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-a14 pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-a14 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a14 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-a14 pwm chromax.black.swap comes with 4 black, white, red, blue, green and yellow na-avp1 anti-vibration pads respectively. By combining the various colours with black or leaving off the pads on one side, the fan can be coordinated with most popular build colour schemes out of the box. Additional na-savp1 sets for outfitting both sides in one colour can be purchased separately.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.square 140mm framethe nf-a14's square 140mm frame with 140mm mounting holes (124.5mm spacing) makes it a premium grade replacement for common 140mm case fans and perfect for use on 140mm water cooling radiators, where its square shape will ensure full coverage and best pressure performance.flow acceleration channelsthe nf-a14 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the chromax edition fans use noctua’s custom-designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at low speeds.6-year manufacturer’s warrantynoctua fans are renowned for th

Noctua NF-S12A PWM chromax.black.swap 120mm -kotelotuuletin

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-s12a is one of noctua’s most renowned and popular 120mm fans. Its outstanding airflow efficiency and superb acoustics make it ideal for case cooling and other low-impedance applications. The chromax.black.swap edition combines the nf-s12a’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables, additional anti-vibration pads and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium-grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-s12a pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-s12a designhaving received more than 100 awards and recommendations from the international press, noctua's nf-s12a has become a proven premium choice for 120mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-s12a pwm chromax.black.swap comes with 4 black, white, red, blue, green and yellow na-avp1 anti-vibration pads respectively. By combining the various colours with black or leaving off the pads on one side, the fan can be coordinated with most popular build colour schemes out of the box. Additional na-savp1 sets for outfitting both sides in one colour can be purchased separately.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.anti-stall knobsthe nf-s12a's anti-stall knobs reduce flow separation phenomena in medium to high impedance situations and thereby increase the fan's stall margin. This means that the nf-s12a is even more versatile than its renowned predecessor and can achieve better performance on heatsinks and radiators.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the chromax edition fans use noctua’s custom-designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at low speeds.6-year manufacturer’s warrantynoctua fans are renowned for their impeccable quality and outstanding longevity. Like all noctua fans, the chromax edition models feature an mtbf of more than 150,000 hours rating and come with a full 6-year manufacturer's warranty.

Oral-B Vitality Pro + Extra Refill -sähköhammasharja, violetti

Ladattava oral-b vitality pro -sähköhammasharjamme tarjoaa ylivoimaista puhdistusta verrattuna tavalliseen käsikäyttöiseen hammasharjaan – se on kliinisesti todistettu.hammasharjassa on 3 harjaustilaa: päivittäinen puhdistus, hellävarainen ja sensitive plus -tila erittäin hellävaraiseen kokemukseen. Kahvaan sisäänrakennettu ajastin auttaa harjaamaan 2 minuutin ajan hammaslääkärien suosituksen mukaisesti.ja mikä parasta – sen on luonut oral-b, hammaslääkäreiden eniten maailmanlaajuisesti käyttämä tuotemerkki.- välttämätön hammasharja parempaan ja hellävaraisempaan puhdistukseen- oral-b:n ainutlaatuinen 2d-puhdistustekniikka: värähtelee ja pyörii poistaen jopa 100 % enemmän plakkia verrattuna käsikäyttöiseen hammasharjaan- 3 harjaustilaa: päivittäinen puhdistus, hellävarainen ja ainutlaatuinen sensitive plus -tila erittäin hellävaraiseen kokemukseen- hammaslääkärin inspiroima pyöreä harjaspää ympäröi jokaisen hampaan puhdistaen syvältä samalla kun se on hellävarainen ikenille- ladattava hammasharja kätevällä pitkäkestoisella akulla- oral-b:n harjaspää haalistuu vihreästä keltaiseksi osoittaen, milloin on aika vaihtaa, jotta puhdistusteho säilyy 100 %:na- oral-b on hammaslääkäreiden eniten maailmanlaajuisesti käyttämä tuotemerkki. Kliinisesti todistettu puhdistussisältö: 1 varsi, 1 laturi, 2 harjaspäätä

Noctua NF-A14x25 G2 PWM Premium 140mm -kotelotuuletin

Succeeding the award-winning nf-a14 and building on the technological innovations of the ground-breaking nf-a12x25, the nf-a14x25 g2 is noctua’s next-generation square-frame 140mm flagship model: made from sterrox® lcp, its highly optimised progressive-bend impeller with winglets, flow acceleration channels and centrifugal turbulator hub combined with a tip-clearance of only 0.7mm allow the nf-a14x25 g2 to further improve its predecessor’s renowned quiet cooling performance. Like the nf-a14 and nf-a12x25, it is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, static pressure demanding scenarios such as on heatsinks and water cooling radiators. For application-specific optimisation, the nf-a14x25 g2 comes with an na-avg2-lr anti-vibration gasket pre-installed to create a tighter seal on radiators. Additionally, its aao (advanced acoustic optimisation) frame can be combined with the optional na-is1-14 inlet spacer, which can help to achieve superior suction acoustics and flow rates in challenging intake configurations. The 4-pin pwm version supports fully automatic speed control via pwm fan headers and comes with a low-noise adaptor to reduce the maximum speed from 1500 to 1250rpm. Its ultra-low-loss etaperf™ motor with smooth commutation drive 2 technology doesn’t only provide unprecedented energy efficiency and running smoothness, but thanks to the new supratorque™ feature, it can also leverage extra torque headroom to keep the fan at its desired speed when working against back pressure, thereby ensuring even better performance on heatsinks and radiators. Topped off with noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a14x25 g2 is a premium-quality product through and through. Its superior performance, comprehensive feature set, cutting-edge construction and state-of-the-art materials set a new standard within noctua’s portfolio and make it an elite choice for the most discerning demands.

Noctua NF-A15 HS, PWM, chromax.black.swap, 140mm -kotelotuuletin, musta

Having received more than 100 awards and recommendations from international hardware websites and magazines, the nf-a15 is one of noctua’s most renowned and popular 140mm fans. Its 150mm wide round frame with 120mm standard mounting holes (105mm hole spacing) makes it ideal for use on cpu coolers such as the popular nh-d15, nh-d15s or nh-u14s. The chromax.black.swap edition combines the nf-a15’s signature quiet cooling performance with an attractive all-black design and a bundle of swappable red, white, blue, green, yellow and black anti-vibration pads that allow the colour-customisation of the fan to match individual build colour schemes. For further customisation, a wide range of accessories such as coloured cables and anti-vibration mounts are available separately. Topped off with noctua’s trusted premium grade sso2 bearing, more than 150,000 hours mttf and 6-year manufacturer’s warranty, the nf-a15 hs-pwm chromax.black.swap is the perfect choice for all users who value individual, focused build aesthetics just as much as class-leading quality and performance. Award-winning nf-a15 designhaving received more than 100 awards and recommendations from the international press, noctua's nf-a15 has become a proven premium choice for 140mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world.chromax.black.swap editionmaximising colour choices, noctua’s chromax.black.swap edition fans can be colour-customised using the included swappable anti-vibration pads as well as optional anti-vibration mounts and cables. This makes them ideal for enthusiasts looking for true premium-grade fans that can be colour-coordinated with popular build themes such as all black, black & white or black & red.swappable anti-vibration pads in 6 coloursthe nf-a15 hs-pwm chromax.black.swap comes with 8 black, white, red, blue, green and yellow anti-vibration pads respectively, which allows the fan to be fully colour-customised in order to coordinate it with other components or popular build schemes.optional coloured cablesnoctua’s chromax line fans use a modular cabling system and come pre-fitted with a fully sleeved black na-ec1 30cm cable. For refined colour coordination, white, red, blue, green and yellow 30cm na-ec1 cables plus corresponding na-yc1 y-cables are available separately.optional coloured anti-vibration mountsto complement the coloured anti-vibration pads included with the fans, users can purchase chromax line na-sav2 anti-vibration mounts that enable the convenient, quick and vibration-free installation of fans in standard mounting holes for case fans.round 140mm frame with 150mm widththe nf-a15 is tailor-made for use on today's high-end cpu coolers: while its 150mm width matches those of most high-end heatsinks, its 140mm height doesn't make it extend on top and thus ensures best case compatibility. The nf-a15's standard 120mm mounting holes (105mm spacing) also make it an ideal performance upgrade for 120mm case or cpu fans.flow acceleration channelsthe nf-a15 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.aao framenoctua's aao (advanced acoustic optimisation) frames feature integrated anti-vibration pads as well as noctua's proprietary stepped inlet design and inner surface microstructures, both of which further refine the fan's performance/noise efficiency.stepped inlet designnoctua's stepped inlet design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.inner surface microstructureswith the tips of the fan blades ploughing through the boundary layer created by the inner surface microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.sso2 bearingthe chromax line fans feature the further optimised second generation of noctua’s renowned, time-tested sso bearing. With sso2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.metal bearing shellin order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the chromax edition fans sport a cnc milled bearing shell made entirely from brass.custom-designed pwm ic with scdsupporting fully automatic pwm speed control, the chromax edition fans use noctua’s custom-designed ne-fd1 pwm ic that integrates smooth commutation drive (scd) technology. By providing smoother torque impulses, scd suppresses pwm switching noises and thus makes the fan quieter at low speeds.6-year manufacturer’s warrantynoctua fans are renown

Noctua NF-A14x25 G2 LS-PWM Premium Fan 140x25mm -tuuletin

Succeeding the award-winning nf-a14 and building on the technological innovations of the ground-breaking nf-a12x25, the nf-a14x25 g2 is noctua’s next-generation square-frame 140mm flagship model: made from sterrox® lcp, its highly optimised progressive-bend impeller with winglets, flow acceleration channels and centrifugal turbulator hub combined with a tip-clearance of only 0.7mm allow the nf-a14x25 g2 to further improve its predecessor’s renowned quiet cooling performance. Like the nf-a14 and nf-a12x25, it is a true all-rounder that yields superb results in all types of usage, regardless of whether it’s in low-impedance, airflow-oriented applications such as case cooling, or high-impedance, static pressure demanding scenarios such as on heatsinks and water cooling radiators. For application-specific optimisation, the nf-a14x25 g2 comes with an na-avg2-lr anti-vibration gasket pre-installed to create a tighter seal on radiators. Additionally, its aao (advanced acoustic optimisation) frame can be combined with the optional na-is1-14 inlet spacer, which can help to achieve superior suction acoustics and flow rates in challenging intake configurations. The 4-pin ls-pwm version is a low-speed, pwm-enabled variant that is ideal for semi-passive setups or ultra-low-noise applications that require near-silent acoustics and pwm based speed control. Its super-low-loss etaperf™ motor with smooth commutation drive 2 technology combines unprecedented energy efficiency with a superb running smoothness that is guaranteed to satisfy even the most noise-sensitive users. Topped off with noctua’s reference-class sso2 bearing, a rich bundle of accessories and 6-year manufacturer’s warranty, the nf-a14x25 g2 is a premium-quality product through and through. Its superior performance, comprehensive feature set, cutting-edge construction and state-of-the-art materials set a new standard within noctua’s portfolio and make it an elite choice for the most discerning demands.next-generation performancenoctua’s nf-a14 is renowned as being among the best 140mm fans on the market and has received more than 100 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the nf-a14x25 g2 represents another step up in performance and manufacturing.highly optimised p/q curve for all applicationsthe nf-a14x25 g2’s sophisticated aerodynamic design allows for a pressure to airflow (p/q) curve that is extremely strong in the critical mid-section. This means that the nf-a14x25 g2 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.excellent on-application acousticswhile many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the nf-a14x25 g2 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (spl) when working against back pressure.progressive-bend impellerthe nf-a14x25 g2 features a unique progressive bend impeller with flow acceleration channels and winglets. Its nine blades are swept backwards close to the hub and progressively bent forward further out. Working in tandem with the centrifugal turbulator hub, this design not only helps to push more air towards the outer blade areas where efficiency is higher but also assures maximum lift and near uniform loading across the entire blade span.centrifugal turbulator hubacting as a turbulator, the new centrifugal turbulator hub design improves flow attachment in the hub region. At the same time, it’s centrifugal driving motion pushes air outwards from the hub area where efficiency is low due to the slow rotational speed towards the outer, high-efficiency zones of the blades, thereby increasing overall efficiency by optimising fluid distribution across the impeller area.flow acceleration channelsthe nf-a14x25 g2 impeller features suction side flow acceleration channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.wingletswinglets can help to reduce tip vortices that are caused by the pressure differential between the suction and the pressure side of fan blades but bear the risk of reducing efficiency due to extra fluid displacement in high velocity regions. The nf-a14x25 g2’s small winglets have been carefully fine-tuned to provide consistent efficiency gains working in tandem with its progressive-bend blade geometry, flow acceleration channels and aao frame.ultra-tight tip clearancethe nf-a14x25 g2 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.7mm. This highly ambitious design sets a new benchmark for 140mm fans and helps the nf-a14x25 g2 to work more efficiently against back pressure, such as o

Noctua NV-FH2, 8-kanavainen tuuletinhubi 5V/12V/25V -tuulettimille, musta

The nv-fh2 is a flexible, premium-quality 8 channel pwm fan hub that is ideal for powering up to eight fans in home, office or multi-purpose ventilation applications using an external power supply with 5.5mm barrel connector such as noctua’s optional nv-ps1. It’s compatible with 5, 12, and 24v fans with 4-pin pwm and 3-pin connectors and supports up to 60w total power draw. While 3-pin fans can be speed-controlled by voltage adjustment, 5 and 12v pwm fans can be controlled by connecting the optional na-fc1 controller to the nv-fh2’s 4-pin pwm input. Alternatively, the nv-fh2 can also be powered via this input (up to 22w total power draw), e.g. In pc environments where it can be run off motherboard fan headers with pwm control and rpm monitoring, or when used with noctua 5v pwm fan models that include usb power adaptor cables that make it possible to run the nv-fh2 off power banks or standard usb power supplies. Thanks to its advanced protection and signal filtering features, the nv-fh2 not only runs safely with fans that produce high starting currents or transients, but also supports cascading multiple units for controlling up to 71 fans simultaneously. Fixing the nv-fh2 is a breeze thanks to the integrated magnets that enable snap-on placement on steel surfaces, as well as the mounting tabs with screw holes that make it possible to fix it using screws or cable ties. The hub can either be run without the included clip-on cover for easy status monitoring via its white status leds or with the cover on for extra protection from dust, contact or mechanical impact. Topped off with ce, ukca and ul certifications, full compliance with all applicable safety standards as well as noctua’s 6-year manufacturer’s warranty, the nv-fh2 represents the gold standard in highly robust multi-purpose splitter boards that work just as nicely inside a pc as in other ventilation applications.5v, 12v and 24v fan supportthanks to its high quality mosfet transistors, the nv-fh2 supports 5v, 12v and 24v fans. This makes it a great choice not only for use with 12v pc case fans, but also for 5v-based home ventilation setups as well as 24v environments such as 3d printers or industrial applications.compatible with 4-pin pwm and 3-pin fanswhile only 4-pin pwm fans can be controlled via pwm, the nv-fh2’s keyed output connectors are also compatible with 3-pin fans, so it can also be used to run multiple 3-pin fans from a single power source and to adjust their speed simultaneously by reducing the input voltage.flexible power inputthe nv-fh2 can be powered either via it’s 5.5mm (outer diameter) / 2.1mm (inner diameter) barrel connector input using a power supply such as the optional nv-ps1 or via the 4-pin pwm input. If both inputs are connected, the nv-fh2 will automatically take power from the barrel connector and only use the 4-pin port for pwm control and rpm monitoring.up to 60w total power drawwhen powered via the barrel connector, the nv-fh2 can run fans with a combined power draw of up to 60w. When using the 4-pin pwm input only, the maximum power draw is limited to 22w using an auto-resetting safety fuse to protect the connector. Each output port is protected by a self-resetting 0.75a fuse.cascading support for up to 71 fansthe nv-fh2 supports cascading in the sense that up to ten nv-fh2 units can be daisy-chained in order to run and control up to 71 fans. The nv-fh2’s control circuit with single bus buffer keeps pwm signals stable without jeopardising ttl logic levels on the follower boards.controlling high-power fans safelyif both its 5.5mm barrel and 4-pin input ports are connected, the nv-fh2 will draw power via the barrel connector and use the 4-pin port only for pwm control and rpm monitoring. This way, it is possible to control fans with high power consumption safely without risking damage to the host device connected to the 4-pin port.safety fusesthe nv-fh2’s 4-pin input is protected with a 1.85a safety fuse so that the connectors specified current limit cannot be exceeded. Additionally, each fan connector is fused separately with 0.75a to prevent overcurrent on the individual outputs.inrush current protectionthe nv-fh2 features a sophisticated inrush current protection that prevents the connected fans from being damaged if a fan with high inrush current is connected or if there are transients from the power input.leds for status monitoringall fan ports of the nv-fh2 feature white status leds that light up if an rpm signal is being received and go off if the fan stops or fails. For more sophisticated watchdog functionality, the rpm signal of the fan connected to output port 1 is transmitted via the 4-pin input port and can be processed by pc motherboards or other devices such as single board computer systems (e.g. Arduino, raspberry pi, etc.).status leds with flank controlthanks to advanced flank control measures, the nv-fh2’s status leds don’t flicker and always show the correct on/off state when a fan is blocked or stopped